(C104CS26) Quartz Micro Cuvette, 10 mm / 3 mm (dual path) Path, 1.05 mL

Weight	30 g

SKU: C104CS26

Original price was: $72.00.Current price is: $65.00.

In Stock

JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm primary path, 3 mm secondary path and Four-Way Light access. Its 1.05 mL nominal capacity and 12.5 × 12.5 × 45 mm uncapped body suit compact fluorescence setups that use a defined dual-path geometry. Supplied as 1 micro cuvette with a closure included.

In Stock

SKU: C104CS26 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CS26 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm primary path, a 3 mm secondary path and Four-Way Light access. The 1.05 mL nominal capacity gives you a defined small-volume chamber in a compact 12.5 × 12.5 × 45 mm uncapped body, which is useful when you need to plan both holder fit and measurement orientation. This listed sale unit is 1 cuvette, with a closure included.

Path Length: 10 mm / 3 mm (dual path)
Sample Volume (Nominal): 1.05 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm / 3 mm (dual path)
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	3 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.05 mL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	3 mm

Choose this option

Choose this cell when your fluorescence method uses a dual-path micro cuvette format rather than a simple straight-through transmission cell. The 10 mm / 3 mm geometry, four-side optical access and compact square body help when you need to control how the cell sits in the holder and how the beam approaches the sample region.

What makes this option different

10 mm primary path with a 3 mm secondary path for a defined dual-path layout.
Four-Way Light configuration for fluorescence setups that use side optical access.
1.05 mL nominal capacity in a compact micro cuvette body.
Standard 80 adhesive-bonded construction for routine room-temperature water-based samples and buffers.

Using this cell

Fill the cuvette so the intended light path passes through a fully covered liquid region, and keep the optical faces free from bubbles, fingerprints and dried residue. For blank and sample runs, use the same seating direction each time so the beam enters the same faces consistently.

The stated 1.05 mL is the nominal capacity of the cell body. It is not a minimum working volume, so the practical fill level should be set by your beam position and measurement procedure.

First-use check

Inspect the optical faces, chamber edges and closure contact area before first use. Test the uncapped body in your holder, rinse with a suitable water-based liquid for your method, then run a blank to confirm stable seating and a clear optical path through the filled region.

Fit and optical alignment

The stated 12.5 × 12.5 × 45 mm dimensions apply to the uncapped cell body. Use those body dimensions for holder-fit checks, and allow extra top clearance for the supplied closure because the full capped envelope is not specified here.

Z Height is not established for this cuvette. If your fluorescence setup depends on a defined beam-center height, check alignment in your holder before ordering rather than relying on body size alone.

Solvents and cleaning

This adhesive-bonded Standard 80 option is intended for routine room-temperature water-based samples and buffers. Avoid organic sample solvents and organic cleaning liquids with this version.

Ethanol soaking or rinsing is not suitable for this option. Acid, alkali and organic-solvent use are also excluded for this adhesive-bonded cell. Do not use hydrofluoric acid on quartz, and avoid abrasive cleaning materials on the optical faces.

Included with this option

Price is for 1 micro cuvette. A closure is included with the cell.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz versions when you need different dimensions, optical path length, sample volume, optical access, Z Height or closure details. Send a dimensioned drawing or labelled sketch together with holder information and sample conditions, and discuss your requirements with part number C104CS26.