(C102CE2) Quartz Micro Cuvette, 10 mm Path, 1.75 mL

Weight	30 g

SKU: C102CE2

Original price was: $179.00.Current price is: $162.00.

In Stock

JGS1 quartz micro cuvette for UV/Vis spectroscopy with a 10 mm optical path, Two-Way Light layout and 1.75 mL nominal capacity. This version includes a PTFE lid and is sold as 1 cuvette per price unit.

In Stock

SKU: C102CE2 Categories: Cuvettes, Products, Quartz Micro Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CE2 is a JGS1 quartz micro cuvette for UV/Vis work built around a standard 10 mm optical path. Its 1.75 mL nominal capacity and 5 mm sample region make it a compact option when you want a reduced-volume cell body without changing to a shorter path length. This sale unit includes 1 cuvette with a PTFE lid.

Path Length: 10 mm
Sample Volume (Nominal): 1.75 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	5 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.75 mL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	5 mm

Choose this option

Choose C102CE2 when your method uses straight transmission through two opposing optical faces and you want a single replacement or one-position setup in JGS1 quartz. The covered top helps with routine sample handling, while the compact micro format is useful when a full-size cell body is not necessary.

What makes this option different

10 mm optical path for UV/Vis methods built around the standard path length.
Two-Way Light configuration for direct transmission measurements through opposite windows.
1.75 mL nominal capacity with a 5 mm sample region in a compact micro cuvette format.
PTFE lid included with this 1-piece sale unit.

Using this cell

Fill the cell so the illuminated sample region is covered during measurement, and keep the optical faces free from fingerprints, residue and bubbles. Use the same seating direction for blank and sample runs so the optical path stays consistent.

The stated 1.75 mL is the nominal cell capacity. It should not be treated as a minimum working volume, so lower-fill methods should be checked against the actual beam position in your instrument.

First-use check

Inspect the cell body and lid for dust or transport residue.
Place the empty cell in the holder to check seating and clearance.
Run a blank in the intended wavelength range and orientation.
Confirm that the liquid level fully covers the beam path without trapped bubbles.

Fit and optical alignment

The listed body size is 12.5 × 12.5 × 45 mm for the uncapped cell. Use that size to check holder fit and compartment clearance for the body itself.

Allow extra space above the cell because the installed height with the lid is not stated here. Z Height is also not established for this SKU, so if your holder or spectrometer depends on a defined beam-center height, that point should be checked before ordering.

Solvents and cleaning

This cuvette is listed as Molded 83 fabrication, with an optical-contact construction term used by the supplier. It is intended for UV/Vis use across the stated 200–2500 nm range.

Specific chemical limits are not established here for the complete assembly, including the lid. Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with non-abrasive optical tissue and a suitable compatible liquid.

Included with this option

Supplied as 1 quartz micro cuvette with a PTFE lid included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to dimensions, optical path length, sample volume, optical windows, Z Height, closures or fabrication details. Send a dimensioned drawing or labelled sketch, together with holder information, wavelength range, sample conditions and quantity, through this contact page and quote C102CE2.