(C104TS15) Quartz Micro Cuvette, 10 mm / 2 mm (dual path) Path, 700 µL, Pack of 2

Weight	30 g

SKU: C104TS15

Original price was: $949.00.Current price is: $855.00.

In Stock

C104TS15 is a JGS1 quartz micro cuvette for fluorescence spectroscopy, combining a 10 mm main path with a 2 mm secondary path in a Four-Way Light layout. Its 700 µL nominal capacity and compact 12.5 × 12.5 mm base suit methods that need side optical access in a small covered cell. Supplied as a pack of 2 cuvettes, with closures included.

In Stock

SKU: C104TS15 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TS15 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm / 2 mm dual-path layout in a compact square body. The Four-Way Light configuration gives side optical access for fluorescence setups, while the 700 µL nominal capacity keeps the cell in a small covered format rather than a larger body size. This sales option is supplied as a pack of 2 cuvettes.

Path Length: 10 mm / 2 mm (dual path)
Sample Volume (Nominal): 700 µL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm / 2 mm (dual path)
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	2 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 12.5 × 56 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 56 mm
Overall Height without Closure	56 mm
External Dimensions Scope	Uncapped Cell
Body Height	45 mm
Overall Height with Closure	60 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	2 mm

Choose this option

Choose C104TS15 when your method needs both a 10 mm path and a 2 mm secondary path in the same micro cuvette, and when buying two cells in one order suits your routine or parallel work. The covered top is useful for sample handling, and the 12.5 × 12.5 mm base fits setups built around a compact square cuvette footprint.

What makes this option different

10 mm / 2 mm dual path: two stated optical directions in one micro cuvette body.
Four-Way Light configuration: side optical access supports fluorescence measurement geometry that uses multiple faces.
700 µL nominal capacity: micro-cuvette volume in a compact covered format.
Pack of 2 cuvettes: this MQ sales option includes two physical cuvettes per price unit.

Using this cell

Fill the cell so the illuminated sample region is fully covered during measurement. The 700 µL value is the nominal capacity, not a minimum working volume, so set your actual fill level according to your beam position and the way the cell is used in your instrument.

Keep the optical faces clean and free from droplets, fingerprints and dried residue. Use the same seating direction for blank and sample runs, and fit the closure gently after filling.

First-use check

Before first measurement, inspect the optical faces under good light and rinse with a liquid suitable for your method. Check that the cuvette seats squarely in the holder, then run a blank in the same orientation you will use for the sample.

Fit and optical alignment

The square base is 12.5 × 12.5 mm. For holder planning, distinguish between the 45 mm body height, the 56 mm uncapped overall height and the 60 mm overall height with the closure fitted, because the neck and cap can affect vertical clearance even when the main body fits the holder.

Z Height is not specified for this SKU. If your instrument has a fixed beam height or a tight fluorescence collection geometry, check the actual beam position against your holder rather than assuming alignment from the outside height alone.

Solvents and cleaning

This cuvette uses Molded 83 fabrication. This type is commonly chosen for methods involving organic solvents or temperature-related work, but suitability should still be checked for the complete assembled cell, including the closure, under your actual sample and cleaning conditions.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. For routine care, rinse promptly after use and wipe the exterior optical faces gently with non-abrasive optical tissue or another suitable non-scratching material.

Included with this option

Supplied as 2 micro cuvettes. A closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Discuss your requirements and mention part number C104TS15.