(C104TS16) Quartz Micro Cuvette, 10 mm / 4 mm (dual path) Path, 1.4 mL

Weight	30 g

SKU: C104TS16

Original price was: $475.00.Current price is: $428.00.

In Stock

C104TS16 is a JGS1 quartz micro cuvette with Four-Way Light access, a 10 mm / 4 mm dual-path layout and 1.4 mL nominal capacity. Its compact 12.5 × 12.5 mm footprint is combined with a fixed screw neck, and a PTFE cap is included. Sold as 1 cuvette.

In Stock

SKU: C104TS16 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104TS16 combines two stated optical paths in one quartz micro cuvette body. It gives you a 10 mm primary path, a 4 mm secondary path and Four-Way Light access, so you can plan around both beam direction and sample volume without moving to a different cell format. This option has a 1.4 mL nominal capacity and is sold as 1 cuvette with a PTFE cap.

Path Length: 10 mm / 4 mm (dual path)
Sample Volume (Nominal): 1.4 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm / 4 mm (dual path)
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.4 mL
External Dimensions	12.5 × 12.5 × 56 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 56 mm
Overall Height without Closure	56 mm
External Dimensions Scope	Uncapped Cell
Body Height	45 mm
Overall Height with Closure	60 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	4 mm

Choose this option

Choose C104TS16 when you want a covered micro cuvette that keeps a standard 10 mm path available while also adding a 4 mm path in the same cell. The Four-Way Light layout is useful where your setup needs optical access from more than one side, and the 1.4 mL nominal capacity suits methods that need more fill than lower-volume micro cells in this family.

What makes this option different

10 mm and 4 mm stated optical paths in one cuvette body.
Four-Way Light configuration for side-access optical layouts with suitable beam geometry.
1.4 mL nominal capacity in a 12.5 × 12.5 mm square footprint.
Fixed screw-neck format with a PTFE cap included.

Using this cell

Fill the cell carefully and keep the optical faces clear of residue, droplets and bubbles in the illuminated region. Use the same orientation for blank and sample so the selected beam direction stays consistent through the method.

The cap is useful for covered handling after filling, but this listing does not establish a pressure rating or closed-loop use limit. If your process involves inversion, transport while filled or any sealed-system duty, check the full assembly against your actual operating conditions.

First-use check

Inspect the optical faces and the cap seating area before first use. Rinse with a liquid suitable for your method, fit the cap gently, and run a blank in the same orientation you plan to use for samples. Make sure the filled sample covers the illuminated region in your instrument.

Fit and optical alignment

The optical body is 12.5 × 12.5 × 45 mm, with a 12.5 × 12.5 mm base for holder seating. The uncapped overall height is 56 mm because the fixed screw neck projects above the body, and the overall height with cap is 60 mm.

That extra height matters when the holder has limited top clearance. Z Height is not specified for this cuvette, so outside dimensions alone do not establish instrument compatibility. The stated 4 mm values refer to the secondary path and the sample-region channel width, not to beam height.

Solvents and cleaning

This cuvette is listed under Molded 83. That construction is commonly chosen for methods where organic solvents or temperature-related process conditions may matter, but suitability still depends on the full combination of sample, cleaning liquid, closure and exposure conditions.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

This sale option includes 1 quartz micro cuvette and 1 PTFE cap.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to path length, sample volume, outside dimensions, optical access or closure details. Send a drawing or labelled sketch, your holder or instrument information, critical dimensions and sample conditions via this contact page, and quote part number C104TS16.