Quartz 10mm Screw Cap Cuvette, 3.5ml, Molded 0.01, Four-Way Light, Screw Cap, Pack of Two, C104TF5

Weight	30 g

SKU: C104TF5

C104TF5 Quartz 10mm Four-Way Light Fluorescence Cuvette 3.5 ml Molded 0.01 PTFE-Lined Screw Cap

~~USD$466.00~~ USD$420.00

In Stock

Quartz 10 mm four-way light fluorescence cuvette, 3.5 ml, Molded 0.01 (>80% transmittance). PTFE-Lined Screw Cap. 190–2500 nm. Pack of Two. SKU: C104TF5.

In Stock

SKU: C104TF5 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes

Description

The C104TF5 is a premium quartz fluorescence cuvette with 10 mm path length and four-way light optical configuration — all four vertical faces are polished to optical grade, providing the standard 90° fluorescence geometry plus additional optical access. With a standard 3.5 ml internal volume (10 × 10 × 52 mm chamber), the cell is compatible with most commercial fluorimeters and UV-Vis spectrophotometers. Fabricated using Molded 0.01 (>83% transmittance, ±0.01 mm tolerance) — precision-molded as a single piece for ultra-tight dimensional accuracy. Features a PTFE-lined screw cap for secure, leak-resistant closure during mixing, inversion, or transport.

Technical Specifications
Material	Quartz (Fused Silica)	SKU	C104TF5
Path Length	10 mm	Internal Volume	3.5 ml
Optical Windows	4 (Four-Way Light)	Fabrication	Molded 0.01
Transmittance	>80%	Wavelength	190–2500 nm
Exterior Dimensions	12.5 × 12.5 × 54 mm	Interior Dimensions	10 × 10 × 52 mm
Cap	PTFE-Lined Screw Cap	Package	Pack of Two

Fluorescence Applications

◆ Steady-state & time-resolved fluorescence

◆ Fluorescence polarization & anisotropy

◆ Standard 90° fluorescence spectroscopy

◆ Fluorescence quenching & titration

◆ Förster resonance energy transfer (FRET)

◆ Quantum yield determination

◆ UV-Vis absorbance (190–2500 nm)

◆ Sample mixing, inversion & transport studies

Why Four-Way Light?

The four-way configuration polishes all four vertical faces to optical grade — the standard geometry for fluorescence spectroscopy. The excitation beam enters through one face and emission is collected at 90° through an adjacent face, minimizing excitation light contamination in the emission signal. The additional two polished faces allow the cuvette to be rotated for alternative measurement geometries or simultaneous absorbance monitoring during fluorescence experiments.

Screw Cap Closure

The PTFE-lined screw cap provides secure, leak-resistant closure that allows the cuvette to be inverted for mixing, transported between workstations, or used in automated sample changers without risk of leakage. The PTFE liner is chemically inert and contributes no background fluorescence. The threaded design allows one-handed operation and consistent sealing pressure.

Why Molded 0.01 Construction?

Molded 0.01 is the premium fabrication method: the cuvette is integrally fused as a single piece with no adhesive or joints. This eliminates solvent attack points and enables operation up to 1200 °C — far exceeding sintered (600 °C) or glue-assembled (200 °C) alternatives. Dimensional tolerance is ±0.01 mm. The monolithic construction withstands all common laboratory solvents, concentrated acids, and bases; avoid HF (hydrofluoric acid). Critically for fluorescence work, the absence of adhesive removes a common source of background fluorescence that can contaminate emission spectra. With transmittance >83%, Molded 0.01 is the gold standard for demanding fluorescence research.

Usage Tips: Handle by non-optical surfaces only — fingerprints on polished faces cause scattering artifacts that raise fluorescence background. Rinse immediately after use. Molded 0.01 construction withstands all common laboratory solvents, concentrated acids, and bases. Avoid HF (hydrofluoric acid). For fluorescence work, ensure the excitation beam enters through a polished window and the detector views at 90° through an adjacent polished face. Compatible with Shimadzu, Agilent, PerkinElmer, Thermo Fisher, JASCO, Hitachi, Horiba, Edinburgh Instruments, and most commercial fluorimeters.

Custom Orders & Academic Purchasing: Need a custom size, path length, or window configuration? We offer made-to-order cuvettes tailored to your specifications. Academic institutions: we accept Purchase Orders (POs) with pay-after-delivery terms. Contact us for quotes and custom requests.

Disclaimer: This product is intended for laboratory and research use only. It is not designed, approved, or intended for use in medical diagnostics, therapeutic procedures, or any clinical application involving human or animal subjects. The buyer assumes all responsibility for determining the suitability of this product for their specific application.