(C012SS3) Quartz Micro Cuvette, 1 mm Path, 350 µL, Pack of 2
10%
Original price was: $456.00.$411.00Current price is: $411.00.
C012SS3 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy with a 1 mm optical path, Two-Way Light geometry and 350 µL nominal capacity. Its slim 12.5 × 3.5 mm body format suits narrow micro-cuvette holders, and the stoppered top supports covered sample handling. Sold as a pack of 2 cuvettes, with closures included.
In Stock
Description
C012SS3 is a JGS1 quartz micro cuvette for UV/Vis spectroscopy with a 1 mm optical path in a slim stoppered format. It combines Two-Way Light transmission geometry with a 350 µL nominal capacity and a narrow 12.5 × 3.5 mm external section, making it useful where a standard square cuvette body would be too wide for the intended holder or setup. This listing is sold as a pack of 2 cuvettes, with closures included.
- Path Length
- 1 mm
- Sample Volume (Nominal)
- 350 µL
- Closure Type
- Stopper
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Pack Quantity | Pack of 2 |
| Path Length | 1 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 350 µL |
| External Dimensions | 12.5 × 3.5 × 45 mm |
| Body Height | 35 mm |
| Base Dimensions | 12.5 × 3.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Stopper |
| Closure Included | Yes |
Choose this option
Choose C012SS3 when your method calls for a 1 mm path length in a narrow UV/Vis micro cuvette rather than a standard 12.5 mm square body. The slim external profile is the key selection point here, together with the straightforward Two-Way Light transmission layout and a covered top for routine sample handling.
What makes this option different
- 1 mm optical path for UV/Vis transmission measurements in a micro-cuvette format.
- Two-Way Light layout with transmission through two opposite optical faces.
- Slim 12.5 × 3.5 mm external section with a stated 45 mm overall height and 35 mm body height.
- Sold as a pack of 2 cuvettes, with closures included for each cell.
Using this cell
Fill the cuvette so the beam passes through a continuous liquid column without bubbles in the optical path. The 350 µL figure is a nominal capacity, not a minimum working volume, so the correct fill level depends on where your instrument beam sits and how the cell is oriented in use.
Insert the stopper gently and keep the top contact area and optical faces clean. The stoppered format gives you a covered top for routine handling, but this page does not establish pressure performance or sealed-process use.
First-use check
Inspect the optical faces and edges for chips, residue or handling marks. Rinse with a liquid suitable for your method, place the cuvette in the holder, and run a blank to confirm clean beam passage at the intended measurement position.
Fit and optical alignment
The stated external dimensions are 12.5 × 3.5 × 45 mm, with a 12.5 × 3.5 mm base and a stated body height of 35 mm. That distinction is useful if your holder clearance depends on the full upper section rather than the body alone.
Z Height is not listed for this SKU, so beam-center alignment should be checked against your instrument requirement before ordering. Two-Way Light describes the optical direction through opposite faces, but it does not by itself guarantee fit in every holder geometry.
Solvents and cleaning
Select the cleaning routine according to the liquids used in your method and the full wetted assembly. A customer-ready fabrication classification is not being stated as a settled specification for this SKU here, so solvent suitability should be checked against your actual sample and cleaning conditions before use.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Wipe the optical faces gently with non-abrasive optical tissue, and store the cuvettes in their protective box when not in use.
Included with this option
Two C012SS3 quartz micro cuvettes, with closures included, supplied as one sales pack.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to dimensions, optical path length, sample volume, optical windows, Z Height, closures and related tolerances. Send a dimensioned drawing or labelled sketch together with your holder details, wavelength range, sample conditions and quantity. Discuss your requirements and quote part number C012SS3.
Additional information
| Weight | 30 g |
|---|---|
| Dimensions | 0.35 × 1.25 × 4.5 mm |
You must be logged in to post a review.
You may also like…
10%
(C012SS2) Quartz Stoppered Cuvette, 1 mm Path, 350 µL
Original price was: $228.00.$206.00Current price is: $206.00.Related products
15%
(MQC379) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.2×0.2mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.11%
(MQC373) Quartz Capillary Tubes (Square), Outer Dim.: 1.8×1.8mm, Inner Dim.: 0.25×0.25mm, Length: 25mm
Original price was: $19.00.$17.00Current price is: $17.00.14%
(MQC363) Quartz Capillary Tubes (Square), Outer Dim.: 0.5×0.5mm, Inner Dim.: 0.3×0.3mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.15%
Reviews
There are no reviews yet.