(C014CS5) Quartz Flow Cell, 1 mm / 10 mm (dual path) Path, 160 µL

Weight	30 g

SKU: C014CS5

Original price was: $380.00.Current price is: $342.00.

In Stock

C014CS5 is a JGS1 quartz flow cell for UV/Vis work with a 1 mm / 10 mm dual optical path, Four-Way Light geometry and 160 µL nominal capacity. Two opposed M6 threaded end openings support compact flow-line integration. Sold as 1 cell per listed price unit.

In Stock

SKU: C014CS5 Categories: Cuvettes, Products, Quartz Custom Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C014CS5 is a quartz flow cell for UV/Vis setups that need two optical path lengths in one flow-through format. It combines a 1 mm primary path with a 10 mm secondary path, Four-Way Light access and a 160 µL nominal capacity, making it useful when both beam geometry and low internal cell volume matter in the same installation.

The JGS1 quartz body supports the stated 200–2500 nm application range. This listing is sold as 1 cell per listed price unit.

Path Length: 1 mm / 10 mm (dual path)
Sample Volume (Nominal): 160 µL
Opening Configuration: Two Threaded End Openings

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Path Length	1 mm / 10 mm (dual path)
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	160 µL
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Port Count	2
Port Thread	M6
Fabrication Method	Molded 83
Opening Configuration	Two Threaded End Openings

Choose this option

Choose C014CS5 when your method benefits from a dual-path flow cell rather than a single-path body. The 1 mm / 10 mm path combination gives you two defined transmission distances in the same cell format, while the Four-Way Light layout adds side optical access for setups that need more than a simple two-face transmission arrangement.

What makes this option different

Dual optical path with 1 mm and 10 mm path lengths in one cell format.
Four-Way Light layout for optical access from four faces of the cell body.
160 µL nominal capacity for compact flow-path planning.
Two opposed M6 end openings for a defined threaded connection format at both ends.

Using this cell

Install the cell through the two opposed M6 threaded end openings and bring liquid in slowly so the optical region fills without visible bubbles. Once the connected path is fully wetted, run your blank under the same flow and wavelength conditions you will use for the sample.

The 160 µL value describes the nominal volume of the cell itself, not the total hold-up volume of your full system. If your method depends on priming, rinse volume or sample carryover control, include the tubing and any added fittings in that planning.

No pressure limit is stated for this listing, so pressurized use should be checked against your own fittings, seals and operating conditions.

First-use check

Inspect the quartz optical faces and port areas for chips, residue or transit damage.
Verify that your selected fittings match the M6 threaded openings.
Flush with a suitable blank or process liquid and inspect the optical region for trapped bubbles.
Confirm beam alignment through the intended optical path in your holder or fixture.

Fit and optical alignment

This cell is useful when you need both a dual-path geometry and four optical access faces in a compact threaded format. The end-port layout can simplify straight-through plumbing, but you should still allow space for fittings and tubing at both ends.

Z Height is not established for this SKU, so instrument fit should not be assumed from the path lengths alone. If your holder or beam line depends on a fixed beam height, please check that requirement before ordering.

Solvents and cleaning

Molded 83 quartz is commonly selected for methods that may involve organic solvents and temperature-controlled work. Chemical suitability still depends on the complete wetted assembly and your actual liquid conditions, including concentration, temperature, contact time and any seals or fittings used with the cell.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and use a cleaning routine that is appropriate for the full assembled flow path.

Included with this option

1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a labelled sketch or drawing together with holder details, wavelength range and the dimensions that are critical to your setup. Discuss your requirements and quote part number C014CS5.