(C202TS) Quartz Screw-Top Cuvette, 20 mm Path, 10 mL

Weight	100 g
Dimensions	2.4 × 2.3 × 5.7 mm

SKU: C202TS

Original price was: $251.00.Current price is: $226.00.

In Stock

C202TS is a JGS1 quartz screw-top cuvette with a 20 mm optical path, 10 mL nominal capacity and Two-Way Light layout for UV/Vis work across 200–2500 nm. Its fused integrated construction and closed-top form suit liquid samples that need a capped chamber rather than an open cell. MQ pricing for this listing is per 1 piece.

In Stock

SKU: C202TS Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C202TS is a JGS1 quartz screw-top cuvette for UV/Vis measurements across 200–2500 nm. It combines a 20 mm optical path with a 10 mL nominal capacity in a closed-top format, giving you a longer transmission path than a standard 10 mm cell while keeping the sample in a screw-top chamber. The 24 × 23 mm base and 61 mm overall height with cap are the key fit points to check against your holder and top clearance.

Path Length: 20 mm
Sample Volume (Nominal): 10 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	20 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	10 mL
External Dimensions	24 × 23 × 57 mm
Body Height	42 mm
Overall Height with Closure	61 mm
Base Dimensions	24 × 23 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap

Choose this option

Choose C202TS when your method calls for a 20 mm path and you want that path in a quartz cuvette with a screw-top opening. The 10 mL nominal chamber suits routine liquid filling in a full-size body, and the fused integrated construction is a practical feature when you want the cell body built as one integrated joined assembly rather than a loose multi-part sample region. Its Two-Way Light layout keeps the measurement direction straightforward through the opposing optical faces used for transmission measurements.

What makes this option different

20 mm optical path for methods set up around a longer transmission path than a 10 mm cuvette.
10 mL nominal capacity in a full-size screw-top body for routine liquid handling.
Fused integrated construction as the supplier’s stated build style for this exact SKU, paired here with a closed-top screw-access sample chamber.
Two-Way Light layout for a direct transmission measurement path through two opposing optical faces.
JGS1 quartz, 200–2500 nm stated range for UV/Vis use within the listed wavelength range.
24 × 23 mm base and 61 mm overall capped height to check holder width and space above the cell.

Using this cell

Fill the cell through the top opening and keep the same orientation for blank and sample measurements. The 10 mL figure is a nominal capacity, so it helps you judge the general chamber size but does not define a minimum working fill or beam coverage height.

This is a screw-top format, which is useful when your procedure benefits from a covered sample chamber during handling. Closure type and exact supplied closure details are not established here, so check that point before ordering if your method depends on a particular cap material, liner or sealing arrangement.

First-use check

Inspect the optical faces for dust, residue or transit marks before use.
Confirm that the base and top section fit your holder without interference.
Run a blank at your working wavelength before loading analytical samples.

Fit and optical alignment

For installation planning, use the stated external dimensions of 24 × 23 × 57 mm for the cuvette body with neck, plus 61 mm overall height with cap. The body height is 42 mm, so top access and any nearby instrument cover or clamp should be checked around both the body and the screw-top area.

Z Height is not listed for this cuvette. If your holder or spectrometer uses a fixed beam position, compare it with your current cell or ask before ordering instead of assuming a match from the outside shape alone.

Solvents and cleaning

This quartz cuvette should not be used with hydrofluoric acid. Avoid hot strong alkalis and abrasive cleaning methods, and wipe the optical faces gently with non-abrasive optical tissue.

The chemical limits of the complete assembly are not established here, including the exact closure components. If your samples or cleaning steps involve organic solvents or other aggressive chemicals, check suitability for the full wetted assembly before use. Compare fabrication options.

Included with this option

Price is for 1 cuvette. Other package contents are not specified here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, construction approach and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that matter to your setup. Discuss your requirements and quote part number C202TS.