(C502CE4) Quartz Large-Window Cuvette, 10 mm Path, 17.5 mL

Weight	100 g

SKU: C502CE4

Original price was: $171.00.Current price is: $154.00.

In Stock

C502CE4 is a JGS1 quartz large-window cuvette with a 10 mm optical path, Two-Way Light transmission and a 17.5 mL nominal capacity for UV/Vis work from 200 to 2500 nm. Its open-top format gives direct access to a larger sample chamber than a narrow standard body, and a closure is included. The listed price is for 1 cuvette.

In Stock

SKU: C502CE4 Categories: Cuvettes, Products, Quartz Large Window Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C502CE4 is a JGS1 quartz large-window cuvette for UV/Vis measurements from 200 to 2500 nm. It combines a standard 10 mm optical path with a 17.5 mL nominal capacity in a wider-body format, so you can keep a familiar path length while working with a larger sample chamber and direct top access. This listed option includes a closure, and the listed price is for 1 cuvette.

Path Length: 10 mm
Sample Volume (Nominal): 17.5 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Large-Window Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	17.5 mL
External Dimensions	52.5 × 12.5 × 45 mm
Body Height	45 mm
Base Dimensions	52.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Included	Yes
Opening Configuration	Open Top

Choose this option

Choose C502CE4 when your method uses a 10 mm path but your handling setup benefits from a broader cell body and more sample space. This format is useful when top filling, rinsing and routine bench handling are easier in a larger chamber than in a narrow upright cuvette.

What makes this option different

10 mm optical path for methods built around a standard transmission length.
17.5 mL nominal capacity in a large-window body rather than a compact low-volume format.
Open-top access with closure included for direct filling and routine handling.
52.5 × 12.5 × 45 mm outer size that should be checked against holder width, depth and vertical clearance.

Using this cell

Fill from the top so the liquid fully covers the beam path during measurement, then remove visible bubbles from the optical region before reading. For consistent results, keep the same orientation for blank and sample measurements and handle the cell by non-optical surfaces where possible.

The supplied closure is useful for routine laboratory handling of the listed configuration. No pressure rating or sealing performance is stated for this SKU, so it should be used as a laboratory sample cell rather than a pressure-tight or leak-qualified assembly.

First-use check

Inspect the optical faces and the top opening on arrival, then rinse the chamber with your measurement solvent or another suitable cleaning solvent before first use. Run a blank at your working wavelength and confirm that the filled sample level and holder position place the beam fully within the optical region.

Fit and optical alignment

This is a Two-Way Light cuvette, with transmission through two opposite optical faces. The larger-body geometry is an important selection point here: even with a standard 10 mm path, the 52.5 × 12.5 × 45 mm body may not suit holders designed only for smaller or differently proportioned cells.

Z Height is not stated for this SKU. If your spectrometer or holder uses a fixed beam center height, check that point before ordering so the beam passes through the intended measurement region.

Solvents and cleaning

Compare fabrication options for your sample and cleaning routine. The detailed chemical limits for this exact SKU are not specified here, so if your method uses aggressive chemicals, elevated temperature or demanding cleaning conditions, please check suitability for the full use routine before purchase.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue or another suitable lint-free wipe.

Included with this option

1 cuvette per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Discuss your requirements and quote part number C502CE4.