(MQQSD001) Quartz Rectangular Sample Cell, 10 mm path, Both Ends Open

Weight	75 g

SKU: MQQSD001

Quartz Rectangular Sample Cell, 10 mm path, Both Ends Open

Product dimensions for checking holder clearance and sample access.

$359.00

In Stock

MQQSD001 is a JGS1 quartz rectangular sample cell with a 10 mm optical path, Four-Way Light access, and an open body at both ends. Its 13 × 13 × 100 mm body suits UV/Vis setups that use a long cell body with separate fixturing or sealing. Sold as 1 piece.

In Stock

SKU: MQQSD001 Categories: Cuvettes, Products, Quartz Standard Cuvettes Tags: 10 mm path length, Cuvettes, Four-side light-transmitting, Quartz Cuvette

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQSD001 is a JGS1 quartz rectangular sample cell for UV/Vis spectroscopy with a 10 mm optical path, Four-Way Light access, and a body that is open at both ends. The long 13 × 13 × 100 mm format is useful when the cell body is built into a separate holder, seal, or process fixture instead of being used as a self-contained cuvette.

Path Length: 10 mm
Cell Type: Rectangular Sample Cell
Opening Configuration: Open at Both Ends

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
External Dimensions	13 × 13 × 100 mm
External Dimensions Scope	Body Only
Body Height	100 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open at Both Ends
Pack Quantity	1 Piece
Wall Thickness	1.5 mm
Package Contents	1 × Quartz Rectangular Sample Cell

Choose this option

Choose MQQSD001 when your setup needs a 10 mm quartz cell body with optical access from four sides and open access at both ends. The extra body length helps when you need mounting space, end sealing, or controlled positioning inside a custom assembly.

What makes this option different

10 mm optical path for methods written around this transmission length.
Open at both ends for assemblies that use external seals, fittings, or process-specific sample handling.
Four-Way Light configuration provides optical access through all four side faces.
13 × 13 × 100 mm body gives a long rectangular form for fixture and clearance planning.

Structure and dimensions

Using this cell

This product is an open cell body, so sample loading and sealing are handled by your own fixture or mating components. Set the measurement direction to the 10 mm path and keep that orientation consistent for blank and sample runs.

Before measurement, mount the assembly so the beam passes cleanly through the intended sample region. Remove bubbles and exterior droplets, and handle the cell by non-optical surfaces where possible.

First-use check

Inspect the optical faces and both open ends for chips, residue, or handling marks.
Test the cell in the final fixture and confirm beam alignment with a suitable blank.
After filling, check for bubbles, leaks at the assembled sealing points, and stable positioning in the holder.

Fit and optical alignment

View the English selection reference. Also available in the product gallery.

The stated 13 × 13 × 100 mm dimensions apply to the body only. Check holder clearance, end-sealing parts, and beam position separately, especially if your fixture sets the beam height or uses end connections.

Z Height is not listed for this option, so instrument fit should be checked against your holder or beam-center requirement rather than assumed from the overall body height. The 1.5 mm wall thickness is a body detail only and is not another optical path value.

English selection reference — Selection reference ↗

Solvents and cleaning

Chemical limits for this exact assembled configuration are not specified here, so choose the cleaning routine for the complete setup, including any separate seals or mating parts. For organic solvents, aggressive liquids, elevated temperature, or long contact time, check the full assembly conditions before use.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

1 quartz rectangular sample cell body (MQQSD001).

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication, and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application.

Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price, and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Send a product-selection enquiry with SKU MQQSD001, your drawing or holder details, sample conditions, quantity, and delivery destination.