(MQQFC045) Quartz Rectangular Sample Cell, 10 mm Path, 43 mL, Open at Both Ends
Description
MQQFC045 is a JGS1 quartz rectangular sample cell for transmission measurements with a 10 mm optical path and a long open-through chamber. Its 43 mL nominal capacity and 86 mm body length make it useful when you need a defined rectangular sample space but want to set the end sealing, filling and support arrangement in your own fixture. The straight exterior also gives a clear envelope for holder design.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 43 mL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 43 mL |
| External Dimensions | 54 × 14 × 86 mm |
| Body Height | 86 mm |
| Base Dimensions | 54 × 14 mm |
| Internal Dimensions | 50 × 10 × 86 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose this cell when your setup needs a 10 mm transmission path in a rectangular quartz body and access from both ends of the chamber. It is a good fit for custom assemblies where the cell body is one part of a larger holder or sealing arrangement, rather than a ready-finished cuvette with built-in closures.
What makes this option different
- 10 mm optical path: suitable for methods built around a standard transmission length.
- Open at both ends: you can design the end sealing, filling and drainage around your own assembly.
- Long rectangular chamber: the internal 50 × 10 × 86 mm geometry provides a straight sample space through the full body height.
- Defined outer body: the 54 × 14 × 86 mm exterior helps when planning holder clearance and support surfaces.
Structure and dimensions

Using this cell
Mount the cell so the beam passes across the 10 mm path. Because the body is open at both ends, the practical loading and retention method comes from the separate end treatment used in your system.
For liquid work, establish how the chamber will be filled, vented and drained before routine measurements. The 43 mL figure is a nominal cell volume for the body, not a minimum working volume, so the actual fill condition should be checked in the finished assembly.
First-use check
- Inspect the optical faces and end edges for chips, residue or handling marks.
- Confirm that the holder supports the body evenly and keeps the beam on the intended path.
- Run a blank in the finished assembly to check filling, drainage and bubble removal.
Fit and optical alignment
Use the 54 × 14 × 86 mm external dimensions for holder clearance and support design. The 50 × 10 × 86 mm internal dimensions describe the chamber itself, not the opening required in your fixture.
Z Height is not listed for this cell, so beam-height matching should be checked from the actual mounted position rather than assumed from overall body height alone. Support the body evenly and avoid concentrated clamping force across the transmitting faces.

Solvents and cleaning
This cell is listed with Molded 83 fabrication. In use, choose the sample-contact and cleaning conditions for the complete assembled setup, including any seals, fittings or supports added around the open ends.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with suitable non-abrasive materials, and check any process liquid or cleaning solvent against the full assembly you intend to build.
Included with this option
1 rectangular sample cell. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz versions for changes to path length, chamber size, exterior envelope, openings and related holder requirements. Send your drawing or labelled sketch, critical dimensions, sample conditions and target quantity through the contact page so the mounting and sealing arrangement can be reviewed around your application.
Additional information
| Weight | 150 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.