(MQQSC015) Quartz Screw-Top Cuvette, 26 mm path, 80 mL nominal capacity, Large Rectangular Sample Chamber
$659.00
MQQSC015 is a JGS1 quartz screw-top cuvette for UV/Vis work with a 26 mm optical path, Two-Way Light configuration and 80 mL nominal capacity. Its large rectangular cell body with a single M14 threaded neck suits top filling when you want a covered opening rather than an open-top chamber. Sold as 1 piece.
Description
MQQSC015 is a large JGS1 quartz screw-top cuvette for UV/Vis measurements with a 26 mm optical path and 80 mL nominal capacity. Its rectangular sample chamber and single threaded neck make it useful for methods that need a larger filled cell with access from the top, while the Two-Way Light layout keeps the optical path on one transmission axis.
- Path Length
- 26 mm
- Sample Volume (Nominal)
- 80 mL
- Opening Configuration
- Single Threaded Neck
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 26 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 80 mL |
| External Dimensions | 60 × 30 × 60 mm |
| Body Height | 60 mm |
| Overall Height with Closure | 80 mm |
| Base Dimensions | 60 × 30 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Screw Cap |
| Port Thread | M14 |
| Opening Configuration | Single Threaded Neck |
| Closure Thread | M14 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQSC015 when your method calls for a longer 26 mm path in a large-volume quartz cell and you prefer threaded top access over an open chamber. The screw-top format helps with filling, closing and handling between preparation and measurement, while the rectangular body gives a stable footprint that is separate from the neck and cap clearance above.
What makes this option different
- 26 mm optical path for methods built around a longer transmission distance than standard short-path cells.
- 80 mL nominal capacity in a large rectangular chamber for applications that use a larger prepared sample volume.
- Two-Way Light configuration for transmission measurement through the intended optical faces.
- Single threaded neck with M14 closure thread for top filling and closing, rather than an open-top access style.
- JGS1 quartz body for UV/Vis use across the stated wavelength range.
- Fused-integrated construction as the supplier’s construction term for this exact SKU.
Using this cell
Fill the cell from the top opening and keep the same orientation for blank and sample so the beam always passes through the intended light path. After filling, clear bubbles from the optical region and wipe exterior droplets before placing the cuvette in the instrument.
The 80 mL figure is the nominal cell capacity, not a verified minimum working volume. If your method uses a low fill level or depends on a specific beam height inside the sample region, those conditions should be checked in your own setup.
First-use check
- Inspect the optical faces and inner chamber for chips, residue or handling marks.
- Place the cuvette in the holder and confirm that the rectangular body seats fully and remains stable.
- Check that the cap area can be reached and turned without interference from nearby instrument parts.
- Run a blank in the same orientation you will use for the sample.
Fit and optical alignment
View the English selection reference.
The bare optical body is 60 × 30 × 60 mm. This body size helps you check holder width, depth and seating without mixing those dimensions with the separate neck and cap envelope.
The overall height with cap is 80 mm, so overhead clearance should be checked separately from the holder opening around the body. The M14 thread is the closure thread at the top opening; it should be matched as a closure interface, not treated as a pressure-rated fluid connection. Z Height is not established here, so instrument fit should be based on your holder and beam position requirements.

Solvents and cleaning
This cuvette uses quartz with a fused-integrated construction term recorded for the exact SKU. For use and cleaning, treat the complete assembled cell carefully and choose cleaning steps that suit both the quartz body and any closure parts used with it.
Chemical limits for this exact assembled SKU are not established here. Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean the optical faces gently with non-abrasive optical tissue or another suitable soft wipe.
For general fabrication background, see MQ Cuvette Fabrication Glossary.
Included with this option
1 Quartz Screw-Top Cuvette and the accompanying closure.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to dimensions, optical path length, sample volume, openings, closures and tolerances. If you need a different fit, please send a product-selection enquiry with SKU MQQSC015 and your holder or method details.
Design notes for this configuration: Large Quartz Screw-Top Cell: Reaching the Chamber through the Neck
Additional information
| Weight | 400 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.