Site Navigation

(MQQSC024) Quartz Screw-Top Cuvette, 30/10 mm paths, Broad Dual-Path Cell

Weight150 g
SKU: MQQSC024

$648.00

In Stock

Quartz Screw-Top Cuvette with 30 mm and 10 mm optical paths in one JGS1 Six-Way Light body for UV/Vis work. Its 12500 µL nominal capacity and single threaded neck suit methods that need a larger filled chamber with top access. Sold as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQSC024 combines two optical paths in one JGS1 quartz screw-top cuvette body: 30 mm and 10 mm. The Six-Way Light layout gives multiple optical access directions, while the 12500 µL nominal capacity suits methods that use a broader filled chamber than small analytical cells. This listing is sold as 1 piece.

Path Length
30 mm / 10 mm (dual path)
Sample Volume (Nominal)
12.5 mL
Opening Configuration
Single Threaded Neck

Selection Specifications

Product KindCuvette
Cell TypeScrew-Top Cuvette
Measurement ModeUV/Vis Spectroscopy
Path Length30 mm / 10 mm (dual path)
Light Transmission ConfigurationSix-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)12.5 mL
External Dimensions32.5 × 12.5 × 45 mm
Body Height45 mm
Overall Height with Closure60 mm
Base Dimensions32.5 × 12.5 mm
MaterialQuartz
Material GradeJGS1
Closure TypeScrew Cap
Port ThreadM10
Fabrication MethodMolded 83
Opening ConfigurationSingle Threaded Neck
Closure ThreadM10
Pack Quantity1 Piece
Package Contents1 × Quartz Screw-Top Cuvette

Choose this option

Choose this cell when your setup needs a larger quartz cuvette with top filling and two available path lengths in the same body. The single threaded neck gives direct access for loading, and the dual-path format can help when your method or instrument arrangement calls for different transmission directions in the same cell format. It is best selected together with your holder layout and the optical direction you intend to use.

What makes this option different

  • 30 mm and 10 mm optical paths in one cuvette body, so orientation matters during use.
  • Six-Way Light configuration for optical access from multiple sides of the cell.
  • 12500 µL nominal capacity for methods that use a larger liquid fill.
  • Single threaded neck with M10 closure thread for top loading in this screw-top format.

Using this cell

Fill the cell through the threaded neck and keep the same orientation for blank and sample measurements so the intended optical path is used consistently. After filling, check that the liquid covers the illuminated region in your setup and remove bubbles from the beam area before measurement.

Keep the exterior optical faces clean and dry, and handle the cuvette by non-optical surfaces where practical. If your procedure uses a cap, note that the body has an M10 closure thread, but this sales option does not list a closure in the confirmed package contents.

First-use check

  1. Inspect the optical faces, neck thread and chamber for chips, residue or transit damage.
  2. Place the cuvette in the holder and confirm the chosen optical direction matches your method.
  3. Run a blank in the same orientation and fill condition you will use for the sample.

Fit and optical alignment

View the English selection reference.

The bare optical body measures 32.5 × 12.5 × 45 mm. A 60 mm overall height is shown with cap, so body dimensions and capped height should not be treated as the same fit envelope. Leave enough space above the holder for filling and for any cap handling you plan to use.

Z Height is not stated for this SKU. If your instrument or holder depends on a fixed beam centerline, check beam height before ordering rather than relying on the external body size alone.

English selection reference
Selection reference ↗

Solvents and cleaning

Molded 83 quartz is commonly chosen for methods that may involve organic solvents or elevated-temperature measurement conditions. For this exact assembled SKU, specific chemical limits are not established, so suitability depends on the complete cell and any closure used with it.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the optical faces gently with non-abrasive laboratory wipes and choose a cleaning routine that suits the parts actually in contact with your sample.

Included with this option

1 quartz screw-top cuvette. The listed price is for one piece. A closure is not listed in the confirmed package contents for this sales option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for projects involving changes to path length, volume, external dimensions, optical windows, Z Height, closures, threads and tolerances. Please send a labelled drawing or holder information, together with liquid conditions and required quantity, if you need a modified version.

Send a product-selection enquiry and include SKU MQQSC024 with your application details.

Additional information

Weight150 g

Reviews

There are no reviews yet.

Be the first to review “(MQQSC024) Quartz Screw-Top Cuvette, 30/10 mm paths, Broad Dual-Path Cell”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare