(MQQFC057) Quartz Rectangular Sample Cell, 1.5/1 mm Dual Path, 60 µL, Open at Both Ends
Description
MQQFC057 is a JGS1 quartz rectangular sample cell with two stated optical paths, 1.5 mm and 1 mm, in one compact body. Its Four-sided optical layout gives optical access from four sides, while the open-at-both-ends construction leaves the sealing and handling method to your fixture design. This is a useful format when you need a small rectangular sample chamber built into a separate holder or flow arrangement rather than a finished cuvette assembly.
- Path Length
- 1.5 mm / 1 mm (dual path)
- Sample Volume (Nominal)
- 60 µL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 1.5 mm / 1 mm (dual path) |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 60 µL |
| External Dimensions | 5.5 × 5 × 43 mm |
| Body Height | 43 mm |
| Base Dimensions | 5.5 × 5 mm |
| Internal Dimensions | 1.5 × 1 × 43 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
The related options offer different paths, capacities or body sizes in the same open-ended format. Compare material and construction as well as dimensions: MQQFC054 is glass; the other options shown here are quartz.
Choose MQQFC057 when your setup needs two defined path directions in the same quartz body and you want direct access to both ends of the sample channel. The 60 µL nominal capacity and slim rectangular form help when holder space is limited, but the final measurement assembly will depend on your own end support, sealing parts or liquid-handling design.
What makes this option different
- Dual path body: one cell body provides both 1.5 mm and 1 mm stated optical paths.
- Four-sided optical access: the rectangular quartz body allows optical access from four sides.
- Open at both ends: the cell body is ready for integration into a separate holder, seal or fluid path.
- Compact chamber: 60 µL nominal capacity in a small rectangular format for space-limited assemblies.
Structure and dimensions

Using this cell
Nominal capacity is not a minimum working-volume specification. Establish the working fill in your assembled fixture so the illuminated region is fully covered and free of bubbles.
Install the cell in one fixed orientation and keep that orientation the same for blank and sample measurements. If your method uses both path directions, mark the preferred orientation in the holder or in your working procedure so the selected beam direction stays consistent.
Because both ends are open, the cell body itself does not provide built-in closure or liquid retention. Filling, sealing and bubble control belong to the surrounding fixture, so it is best to establish that procedure before routine use.
First-use check
- Inspect the optical faces and end openings for chips, residue or handling marks.
- Test the fit in the intended holder before introducing sample.
- Run a blank in the final measurement orientation and verify sample retention and bubble control.
Fit and optical alignment
Check your holder against the 5.5 × 5 × 43 mm external dimensions. The listed 1.5 × 1 × 43 mm internal dimensions describe the sample chamber and should not be used as the holder slot size.
Z Height is not established for this SKU, so beam position should be set from your actual fixture rather than assumed from the overall body height. Support the quartz body evenly and avoid twisting, point loading or concentrated pressure on the optical faces and end edges.
Solvents and cleaning
Molded 83 is the MQ option generally selected for organic-solvent methods or work involving temperature. For this open-ended body, review the liquid, concentration, temperature and contact time together with the end seals and any other wetted parts of your fixture.
Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with suitable non-abrasive materials, and review chemical compatibility for the full assembly if your method involves demanding liquids, elevated temperature or long contact time.
Included with this option
1 rectangular sample cell, SKU MQQFC057. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes to path length, body size, chamber geometry, optical access, Z Height, closures or interface details. Send your drawing or holder details, the critical dimensions and tolerances, the sample conditions and the required quantity for review.
Send a product-selection enquiry with SKU MQQFC057 and your setup details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.