Site Navigation

(MQQFC056) Quartz Rectangular Sample Cell, 1 mm Path, 20 µL, Open at Both Ends

Weight50 g
SKU: MQQFC056

$275.00

In Stock

Compact JGS1 quartz sample cell with a 1 mm optical path, four-sided optical access and 20 µL nominal capacity. The 5 × 5 × 20 mm body contains a 1 × 1 × 20 mm channel open at both ends; sample retention and sealing are provided by your fixture. One cell supplied.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC056 is a JGS1 quartz rectangular sample cell for compact setups that need a short 1 mm optical path in an open-through body. Its 20 µL nominal capacity and Four-sided optical layout make it useful when you want a narrow straight sample channel but plan to provide the holder, sealing method and sample handling separately. This option is supplied as the cell body only.

Path Length
1 mm
Sample Volume (Nominal)
20 µL
Opening Configuration
Open at Both Ends

Selection Specifications

Product KindSpecialized Cell
Cell TypeRectangular Sample Cell
Measurement ModeTransmission Spectroscopy
Path Length1 mm
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)20 µL
External Dimensions5 × 5 × 20 mm
Body Height20 mm
Base Dimensions5 × 5 mm
Internal Dimensions1 × 1 × 20 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodMolded 83
Opening ConfigurationOpen at Both Ends
Pack Quantity1 Piece

Choose this option

The related options offer different paths, capacities or body sizes in the same open-ended format. Compare material and construction as well as dimensions: MQQFC054 is glass; the other options shown here are quartz.

Choose MQQFC056 when your method is built around a 1 mm path and a very compact rectangular cell that will be mounted in your own fixture. The 5 × 5 × 20 mm outer body is easy to check for holder clearance, while the open ends leave filling, sealing and retention to your assembly design.

View the English selection reference.

What makes this option different

  • 1 mm optical path: suitable for methods built around a short fixed transmission length.
  • 20 µL nominal capacity: provided in a straight 1 × 1 × 20 mm internal channel.
  • Four-sided optical layout: optical access is available from multiple sides of the body.
  • Open at both ends: the cell body does not include a cap, fitting or sealed liquid connection.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Nominal capacity is not a minimum working-volume specification. Establish the working fill in your assembled fixture so the illuminated region is fully covered and free of bubbles.

Set the cell so the beam crosses the intended 1 mm path and keep measurement orientation consistent between blank and sample. Because both ends are open, your fixture must define how the chamber is filled, sealed and cleared of bubbles or droplets before measurement.

The 20 µL value is the nominal chamber volume of the cell body. Working behaviour in use will depend on the mounted position and on the holder or sealing arrangement around the open ends.

First-use check

  1. Inspect the optical faces and end edges before installation.
  2. Confirm beam placement and sample position in the actual holder using a blank.
  3. Check that your support and sealing arrangement fills the channel cleanly and leaves the optical path free of bubbles or droplets.

Fit and optical alignment

Use the 5 × 5 mm base dimensions and 20 mm body height to check holder space and clamping geometry. The internal 1 × 1 × 20 mm dimensions describe the sample channel only and should not be treated as the required holder opening.

Z Height is not specified for this SKU, so final beam-centre fit depends on your holder and beam position. Avoid point loading on the quartz body and do not clamp across optical faces in a way that can stress the cell.

Solvents and cleaning

This quartz option is listed under Molded 83. It is commonly selected for methods that may involve organic solvents or temperature, but suitability still depends on the complete wetted assembly and the actual contact conditions.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. Clean the optical faces gently with suitable non-abrasive optical tissue.

Included with this option

1 rectangular sample cell, sold as 1 piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, outer envelope, chamber dimensions or a version designed for a particular holder or sealing method, send your drawing or labelled sketch with the critical dimensions and sample conditions. Custom enquiries generally use JGS1 quartz, with feasibility, quantity, price and production time confirmed for the project.

Send a product-selection enquiry with SKU MQQFC056 and your holder or mounting details.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC056) Quartz Rectangular Sample Cell, 1 mm Path, 20 µL, Open at Both Ends”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare