(MQQFC051) Quartz Rectangular Sample Cell, 10 mm Path, 10 mL, Open at Both Ends
Description
MQQFC051 is a JGS1 quartz rectangular sample cell with a 10 mm optical path in a long straight-through chamber body. The Four-Way Light layout, 10 mL nominal capacity and open-at-both-ends design make it useful for custom fixtures where you want direct access to the chamber and need to define the end support or sealing method yourself.
This version combines a compact 10 × 10 mm internal section with a 100 mm body height. That long body format can help when your mounting arrangement, optical access or surrounding hardware needs more axial length than a shorter open cell provides.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 10 mL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 10 mL |
| External Dimensions | 18 × 18 × 100 mm |
| Body Height | 100 mm |
| Base Dimensions | 18 × 18 mm |
| Internal Dimensions | 10 × 10 × 100 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC051 when you need a 10 mm path in a long rectangular quartz body with access through both ends and light access from four sides. It is suited to custom transmission or observation arrangements where the cell body is only one part of the finished holder, seal or sample-transfer setup.
What makes this option different
- 10 mm optical path for methods that use this stated path length.
- 100 mm long open-ended body for custom installations that need more body length around the chamber.
- Four-Way Light configuration for optical layouts that use more than one light direction.
- R4 rounded corners on the body drawing for checking holder contact and clearance details.
Structure and dimensions

Using this cell
Install the cell so the beam crosses the 10 mm optical path, and keep the same orientation for blank and sample. Because both ends are open, the way you fill, retain or move the sample depends on the holder, seals or end fittings used in your own setup.
The 10 mL figure is the nominal chamber capacity. It should not be treated as a minimum working volume, and any added dead volume or partial-fill condition depends on the complete assembly built around the cell.
First-use check
- Inspect the optical faces, open ends and body edges for chips, residue or transport damage.
- Test the fit in the holder before introducing sample or seals.
- Run a blank in the final measurement orientation and confirm that bubbles or external droplets are cleared.
Fit and optical alignment
Check holder clearance against the 18 × 18 mm outer section and 100 mm body height. The internal 10 × 10 × 100 mm dimensions describe the chamber space only, so they should not be used as the holder opening or sealing-interface size.
Z Height is not stated for this SKU, so beam-center fit should be checked in the actual holder rather than assumed from the overall body dimensions alone. Support the cell evenly and avoid point loading on the optical faces, rounded body edges or end openings.

Solvents and cleaning
This cell is made from JGS1 quartz with a supplier-described powder-fused construction. For general fabrication background, see MQ Cuvette Fabrication Glossary.
Chemical compatibility for the complete working assembly depends on the full arrangement used with this open-ended cell, including any seals, fittings and cleaning method. Keep hydrofluoric acid away from quartz, avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces gently.
Included with this option
1 rectangular sample cell, SKU MQQFC051. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different path length, body size, opening detail or holder fit, send your drawing or labelled sketch together with the critical dimensions, sample conditions and target quantity. Custom JGS1 quartz versions can be reviewed separately from the listed SKU.
Send a product-selection enquiry with SKU MQQFC051 and your holder or installation details.
Additional information
| Weight | 300 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.