Site Navigation

(MQQFC040) Quartz Rectangular Sample Cell, 10 mm Path, 2.8 mL, Open at Both Ends

Weight50 g
SKU: MQQFC040

$179.00

In Stock

Quartz rectangular sample cell with a 10 mm optical path, Four-Way Light access and 2.8 mL nominal capacity. This open-at-both-ends JGS1 quartz body suits setups that use a separate holder, sealing method or end-interface design. Sold as 1 piece.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFC040 is a JGS1 quartz rectangular sample cell for UV/Vis work from 200 to 2500 nm. It combines a 10 mm optical path with Four-Way Light access in an open-ended body, making it useful when you need a standard rectangular transmission chamber but want to define the end support, sealing and sample handling in your own fixture. The nominal capacity is 2.8 mL, with a 10 × 10 × 28 mm internal chamber inside a 12.5 × 12.5 × 28 mm exterior.

View the English selection reference. Group photographs in the gallery may show related options in the series.

Path Length
10 mm
Sample Volume (Nominal)
2.8 mL
Opening Configuration
Open at Both Ends

Selection Specifications

Product KindSpecialized Cell
Cell TypeRectangular Sample Cell
Measurement ModeTransmission Spectroscopy
Path Length10 mm
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)2.8 mL
External Dimensions12.5 × 12.5 × 28 mm
Body Height28 mm
Base Dimensions12.5 × 12.5 mm
Internal Dimensions10 × 10 × 28 mm
MaterialQuartz
Material GradeJGS1
Fabrication MethodMolded 83
Opening ConfigurationOpen at Both Ends
Pack Quantity1 Piece

Choose this option

Choose MQQFC040 when you need a 10 mm path in an open rectangular cell body rather than a complete cuvette with a cap or a ready-connected flow assembly. The longer 28 mm chamber length increases the nominal chamber volume compared with shorter bodies of the same path and cross-section, while Four-Way Light access supports setups that need optical access from two face pairs.

What makes this option different

  • 10 mm optical path in a rectangular open-ended sample chamber.
  • Four-Way Light configuration for optical access through two opposed face pairs.
  • 2.8 mL nominal capacity with a 10 × 10 × 28 mm internal chamber.
  • Open at both ends so the holder or assembly defines filling, retention and end treatment.

Structure and dimensions

Product dimensions for checking holder clearance and sample access.
Product dimensions for checking holder clearance and sample access.Open image ↗

Using this cell

Fill and retain the sample according to the holder, sealing method or surrounding assembly used in your setup. Because the body is open at both ends, the practical filling procedure, bubble control and emptying method depend on how the cell is installed rather than on the cell body alone.

During measurement, keep the optical faces clean and use a consistent orientation between blank and sample. The 2.8 mL figure is the nominal chamber volume, not a minimum working volume, so the final usable fill condition should be established in the mounted setup.

First-use check

  1. Inspect the cell for chips, edge damage and contamination on the optical faces.
  2. Test the fit in the intended holder before introducing valuable samples.
  3. Run a blank in the final mounted orientation and confirm that filling, sealing and bubble removal work as expected.

Fit and optical alignment

Check holder clearance against the 12.5 × 12.5 × 28 mm outer body, and use the 10 × 10 × 28 mm inner dimensions only for the sample chamber. Match your fixture to an open-ended rectangular body rather than to a capped cuvette format, and support the cell across suitable contact areas instead of local pressure on faces or edges.

Z Height is not stated for this SKU. If your instrument or fixture requires a defined beam-center position, verify alignment in the real mounted geometry rather than assuming it from overall body height alone.

English selection reference
Selection reference ↗

Solvents and cleaning

This cell uses Molded 83 construction. This is a suitable selection direction for methods that may involve organic solvents or temperature, while suitability still depends on the complete assembled setup, including any seals, fittings or end supports used with this open cell body.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods, and clean the optical faces gently with non-abrasive materials.

Included with this option

1 MQQFC040 rectangular sample cell. The listed price is for one piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different fit, please send your required optical path, external envelope, holder details, beam position, sealing method and sample conditions. Custom work is generally discussed in JGS1 quartz, with feasibility, quantity, price and timing confirmed for the project. You can also use this contact page and include SKU MQQFC040 with your drawing or fixture details.

Additional information

Weight50 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFC040) Quartz Rectangular Sample Cell, 10 mm Path, 2.8 mL, Open at Both Ends”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare