(MQQFC038) Quartz Rectangular Sample Cell, 10 mm Path, 2.4 mL, Open at Both Ends
Description
MQQFC038 is a JGS1 quartz rectangular sample cell for UV/Vis work from 200 to 2500 nm. It combines a full 10 mm optical path with Four-Way Light access in an open-ended body, making it useful when you want a standard rectangular sample chamber but need to integrate it into your own holder, sealing arrangement or fluid-handling layout. The nominal capacity is 2.4 mL, with a 10 × 10 × 24 mm internal chamber inside a 12.5 × 12.5 × 24 mm exterior.
View the English selection reference. Group photographs in the gallery may show related options in the series.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 2.4 mL
- Opening Configuration
- Open at Both Ends
Selection Specifications
| Product Kind | Specialized Cell |
|---|---|
| Cell Type | Rectangular Sample Cell |
| Measurement Mode | Transmission Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 2.4 mL |
| External Dimensions | 12.5 × 12.5 × 24 mm |
| Body Height | 24 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Internal Dimensions | 10 × 10 × 24 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Molded 83 |
| Opening Configuration | Open at Both Ends |
| Pack Quantity | 1 Piece |
Choose this option
Choose MQQFC038 when your method is built around a 10 mm path but a finished capped cuvette or ready-connected flow cell is not the right format. The square 10 × 10 mm chamber and four-way optical access suit custom fixtures where beam direction, side access or the filling arrangement are set by your own assembly.
What makes this option different
- 10 mm optical path in a rectangular open-ended sample chamber.
- Four-Way Light configuration for optical access through two face pairs.
- 2.4 mL nominal capacity with a 10 × 10 × 24 mm internal chamber.
- Open at both ends for custom mounting, sealing or integration rather than capped bench use.
Structure and dimensions

Using this cell
This cell body does not include built-in closures or fluid connections. For liquid use, define how the sample will be filled, retained and emptied at the two open ends before you install it in routine work.
Align the beam to the 10 mm path and keep the same orientation for blank and sample. The stated 2.4 mL is the nominal chamber volume; your completed setup may need a different fill amount depending on how the ends are handled in the fixture.
First-use check
- Inspect the optical faces, end edges and chamber opening for chips, residue or handling marks.
- Place the cell in the intended holder and confirm stable support before adding sample.
- Run a blank and check filling, emptying and bubble control in the final orientation.
Fit and optical alignment
Use the 12.5 × 12.5 × 24 mm outer dimensions to check holder clearance, and the 10 × 10 × 24 mm inner dimensions only to understand chamber space. The body should be supported across suitable contact areas rather than clamped by local pressure on the optical faces or end edges.
Z Height is not specified for this SKU. If your instrument or fixture has a fixed beam height, verify the beam position in the actual mounted geometry instead of assuming alignment from the 24 mm body height alone.

Solvents and cleaning
Molded 83 is the MQ fabrication designation for this optical-contact quartz construction. It is a suitable selection direction for methods that may involve organic solvents or temperature, while the full assembly still needs to match your actual liquid, concentration, temperature and contact time.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning methods. If your process adds seals, fittings or prolonged liquid contact, ask us to review the complete conditions before ordering.
Included with this option
1 rectangular sample cell, SKU MQQFC038. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We can review custom JGS1 quartz projects for changes to path length, body size, nominal volume, optical access, Z Height and end-interface design. Send your drawing or holder information, sample conditions, quantity and delivery target through this contact page.
Additional information
| Weight | 80 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.