(MQQSC033) Quartz Screw-Top Cuvette, 5 mm path, Large Screw Opening
Description
MQQSC033 is a quartz Screw-Top Cuvette for UV/Vis spectroscopy with a 5 mm optical path, a large screw opening and a Two-Way Light layout. It suits methods that use a straightforward transmission axis while still benefiting from direct top access for filling, rinsing and capping. This listing is sold as 1 piece with an accompanying closure.
- Path Length
- 5 mm
- Cell Type
- Screw-Top Cuvette
- Closure Type
- Screw Cap
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 5 mm |
| Light Transmission Configuration | Two-Way Light |
| Material | Quartz |
| Closure Type | Screw Cap |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQSC033 when you need a 5 mm quartz cell with a removable screw cap and light passing through one opposing pair of faces. It is a practical choice for routine transmission measurements where you want top access to the sample chamber, then covered handling between preparation, blanking and measurement.
What makes this option different
- 5 mm optical path for methods built around this shorter transmission length.
- Two-Way Light configuration for measurements that use one main optical axis through opposing faces.
- Large screw opening gives direct top access for filling, rinsing and cap removal.
- Single-cell sale unit supplied as 1 piece with an accompanying closure.
Structure and dimensions

Using this cell
Fill the cell so the liquid fully covers the illuminated region used by your instrument. Keep the same orientation for blank and sample measurements, and remove visible bubbles before reading, especially if the liquid wets the walls unevenly.
After filling, fit the screw cap carefully and keep the exterior optical faces clean and dry. The cap is useful for covered sample handling, but this product is not presented here as a pressure-rated flow or sealed reaction cell.
First-use check
- Inspect the optical faces and sample chamber for chips, residue or handling marks.
- Test the fit in your holder and confirm that the beam passes through the intended optical faces.
- Run a blank in the same orientation you will use for samples, then verify that filling covers the illuminated region without bubbles.
Fit and optical alignment
View the English selection reference.
Check holder clearance for the body, neck and cap before ordering, particularly if your compartment is tight above the cell position. Z Height is not established for this SKU, so beam position should be checked in your actual holder rather than assumed from the 5 mm path alone.
Nominal volume and minimum working volume are also not established for this exact item. If your application depends on a specific fill level, insertion depth or beam center height, please review the fit against your instrument before purchase.

Solvents and cleaning
This cuvette is listed as Molded 83. In MQ’s fabrication range, this type is commonly selected for methods that may involve organic solvents or heated conditions, but the exact chemical limits for this SKU are not established here.
Use a cleaning routine appropriate to the complete assembly, including the closure. Keep hydrofluoric acid away from quartz, avoid hot strong alkalis and abrasive cleaning methods, and clean the exterior optical faces only with a gentle, non-abrasive optical wipe.
Included with this option
1 Quartz Screw-Top Cuvette and accompanying closure. The listed price is for 1 piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving optical path length, external fit, window arrangement, Z Height, closure details and fabrication or tolerance needs. Send your drawing or holder details together with sample conditions and the dimensions that matter for your setup.
Send a product-selection enquiry with SKU MQQSC033 if you need a different geometry or want us to review holder fit before ordering.
Additional information
| Weight | 100 g |
|---|
You must be logged in to post a review.








Reviews
There are no reviews yet.