Site Navigation

(MQQSC034) Quartz Screw-Top Cuvette, 5 mm path, Large Screw Opening, Pack of 2

Weight200 g
SKU: MQQSC034

$370.00

In Stock

MQQSC034 is a quartz Screw-Top Cuvette for UV/Vis work with a 5 mm optical path, Two-Way Light geometry and a large screw opening for direct top access. The included closures support covered handling between filling and measurement. Sold as a pack of 2.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQSC034 is a quartz Screw-Top Cuvette for UV/Vis spectroscopy with a 5 mm optical path, a large screw opening and a Two-Way Light layout. It suits methods that use one main transmission axis and also benefit from direct top access for filling, rinsing and capping. This option is supplied as a pack of 2 with accompanying closures.

Path Length
5 mm
Cell Type
Screw-Top Cuvette
Closure Type
Screw Cap

Selection Specifications

Product KindCuvette
Cell TypeScrew-Top Cuvette
Measurement ModeUV/Vis Spectroscopy
Path Length5 mm
Light Transmission ConfigurationTwo-Way Light
MaterialQuartz
Closure TypeScrew Cap
Closure IncludedYes
Fabrication MethodMolded 83
Sales Unitpack of 2
Package Contents2 × Quartz Screw-Top Cuvette; Accompanying closures

Choose this option

Choose MQQSC034 when you need two matching 5 mm quartz cells with removable screw caps for routine UV/Vis work, duplicate preparation or parallel handling. The screw-top format keeps access to the sample chamber simple, while the Two-Way Light layout stays focused on a single transmission direction through opposing faces.

What makes this option different

  • 5 mm optical path for methods specified around this shorter transmission length.
  • Two-Way Light configuration for transmission measurements through one opposing pair of optical faces.
  • Large screw opening helps with direct filling, rinsing and cap access from the top.
  • Pack of 2 supplied with accompanying closures under one listed sale unit.

Using this cell

Use the 5 mm path in your method setup and keep the same seating and orientation for blanks and samples. Fill high enough to cover the illuminated region used by your instrument, and remove visible bubbles before measurement.

After loading, fit the screw caps carefully and keep the outer optical faces free from droplets, fingerprints and residue. The capped opening is for sample access and covered handling; it is not presented here as a pressure-rated fitting.

First-use check

  1. Inspect both cells for clean optical faces, an undamaged sample chamber and proper cap fit.
  2. Place each cell in the holder and confirm that the beam passes through the intended optical faces.
  3. Run a blank in the same orientation you plan to use for measurement, then confirm bubble-free filling over the illuminated region.

Fit and optical alignment

View the English selection reference.

Check that your holder allows clearance for the cuvette body, neck and cap, especially above the cell position where cap removal needs room. Z Height is not established for this exact item, so do not assume beam alignment from the optical path alone.

Nominal volume and minimum working volume are not established for this SKU. If your setup depends on a defined beam center height, insertion depth or low fill level, please review the application before purchase.

English selection reference
Selection reference ↗

Solvents and cleaning

This cuvette is listed as Molded 83. In MQ’s fabrication range, this type is commonly selected for methods that may involve organic solvents or heated conditions, but the exact chemical limits for this SKU are not established here.

Choose the sample and cleaning routine for the complete assembly, including the closures. Keep hydrofluoric acid away from quartz, avoid hot strong alkalis and abrasive cleaning methods, and wipe the exterior optical faces only with a gentle non-abrasive optical tissue or similar lab wipe.

Included with this option

2 Quartz Screw-Top Cuvettes and accompanying closures. The listed price is for the pack of 2.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving optical path length, external fit, window arrangement, Z Height, closure details and fabrication or tolerance needs. Send your drawing or holder details together with sample conditions and the dimensions that are critical to your setup.

Send a product-selection enquiry with SKU MQQSC034 if you need a different geometry or would like us to review holder fit before ordering.

Additional information

Weight200 g

Reviews

There are no reviews yet.

Be the first to review “(MQQSC034) Quartz Screw-Top Cuvette, 5 mm path, Large Screw Opening, Pack of 2”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare