(MQQMC046) Quartz Ultra-Micro Cuvette, 10 mm path, Black Walls, 16 mm Z Height
Description
MQQMC046 is a JGS1 quartz ultra-micro cuvette for UV/Vis measurements where both beam position and side access matter. It combines a 10 mm optical path, Four-Way Light geometry and a 16 mm Z Height in a compact 12.5 × 12.5 × 45 mm body, making it useful when you need to check holder fit and optical access together. The listed price is for 1 piece.
- Path Length
- 10 mm
- Cell Type
- Ultra-Micro Cuvette
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Ultra-Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Four-Way Light |
| Z Height | 16 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| External Dimensions | 12.5 × 12.5 × 45 mm |
| Cell Body Dimensions | 12.5 × 12.5 × 45 mm |
| External Dimensions Scope | Body Only |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Ultra-Micro Cuvette |
Choose this option
Choose MQQMC046 when your setup uses a 10 mm path and benefits from optical access on more than one side of the cell body. The open top supports direct filling, while the 16 mm Z Height is an important fit point for holders or instruments with a defined beam centre from the cell base.
What makes this option different
- Four-Way Light configuration for optical access on four sides of the cell body.
- 10 mm optical path in an ultra-micro format.
- 16 mm Z Height from the cell bottom to the optical centre.
- Open-top body for direct sample loading.
- 12.5 × 12.5 × 45 mm body-only dimensions for holder fit checks.
- Standard 80 adhesive-bonded quartz construction.
Using this cell
Fill the cell from the top and keep the same seating direction for blank and sample runs. No nominal capacity is established here for this exact option, so set your working fill by the beam footprint and actual liquid coverage in your method rather than by cell type alone.
Before measurement, inspect the sample region for bubbles and keep the outer optical faces clean and dry. If your holder has a preferred insertion direction, use it consistently so the same optical faces stay in the measurement path each time.
First-use check
- Inspect the optical faces, top opening and body edges before first use.
- Check seating and beam alignment with a suitable blank.
- After filling, remove exterior droplets and confirm that the liquid level covers the illuminated region without bubbles.
Fit and optical alignment
View the English selection reference.
The stated 12.5 × 12.5 × 45 mm dimensions apply to the bare body only. Check holder depth, top access for filling and the side clearance needed to keep the four optical sides unobstructed.
The 16 mm Z Height is measured from the cell bottom to the optical centre. Match that value to your instrument beam position before ordering, especially if your setup uses a narrow illuminated region or a holder with fixed beam height.

Solvents and cleaning
Standard 80 identifies an adhesive-bonded quartz construction. It is commonly selected for room-temperature water-based samples and buffers. Avoid organic samples and organic cleaning solvents with this construction.
If your method involves organic solvents, aggressive cleaning liquids, elevated temperature or long contact time, please check the exact assembly and conditions before use. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaners. Clean exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Ultra-Micro Cuvette. The listed price is for 1 piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication. Send a drawing or labelled sketch together with holder details, beam position, sample conditions and quantity.
Prototype batches typically involve 2–4 cells; feasibility, final specifications, quantity, price and production time are confirmed in the project quotation. Send a product-selection enquiry with SKU MQQMC046.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.