(MQQMC026) Quartz Ultra-Micro Cuvette, 10 mm path, 20 µL nominal capacity, Black-Wall Small-Volume Cell
Description
MQQMC026 is a JGS1 quartz ultra-micro cuvette for UV/Vis spectroscopy with a standard 10 mm optical path in a small-volume format. It combines a 20 µL nominal capacity, 10 mm Z Height and Two-Way Light geometry in a compact open-top body, so you can match sample access, beam height and holder fit in one selection. The listed price is for 1 piece.
- Path Length
- 10 mm
- Sample Volume (Nominal)
- 20 µL
- Opening Configuration
- Open Top
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Ultra-Micro Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 10 mm |
| Light Transmission Configuration | Two-Way Light |
| Z Height | 10 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 20 µL |
| External Dimensions | 12.5 × 12.5 × 45 mm |
| Cell Body Dimensions | 12.5 × 12.5 × 45 mm |
| External Dimensions Scope | Body Only |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Open Top |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Ultra-Micro Cuvette |
Choose this option
Choose MQQMC026 when you need a 10 mm path in an ultra-micro quartz cell and your holder aligns to a 10 mm beam centre from the base. The open top suits direct pipetting, and the 20 µL nominal capacity helps plan small-volume sample preparation without moving to a larger body format.
What makes this option different
- 10 mm optical path for methods that require this path length.
- 20 µL nominal capacity for small-volume sample planning.
- 10 mm Z Height from the cell bottom to the optical centre.
- Two-Way Light geometry for measurement across one defined optical axis.
- Open-top body for direct loading.
- Standard 80 adhesive-bonded quartz construction.
Structure and dimensions

Using this cell
Fill from the open top and make sure the illuminated sample region is fully covered in the measurement position. Because 20 µL is the nominal capacity, not a minimum working volume, your actual fill should be set by beam coverage and liquid level in your method.
Keep the same orientation for blank and sample runs, and check that no droplets or residue remain on the outside optical faces before reading.
First-use check
- Inspect the optical faces and sample region for chips, residue or handling marks.
- Place the cell in the holder and verify that the beam aligns with the 10 mm optical centre.
- Run a blank in the same orientation you will use for the sample, then recheck for bubbles or exterior droplets.
Fit and optical alignment
View the English selection reference.
The stated 12.5 × 12.5 × 45 mm dimensions apply to the body only. Check holder seating and top access against the bare cell body, and confirm that your instrument beam meets the 10 mm optical centre from the base.
If your method depends on a particular beam footprint or aperture, review that fit before ordering. Body height, nominal capacity and Z Height describe different parts of the cell geometry and should be matched separately to your setup.

Solvents and cleaning
Standard 80 is an adhesive-bonded quartz construction generally chosen for room-temperature water-based samples and buffer solutions. Avoid organic samples and organic cleaning solvents with this construction.
If your method involves organic solvents, aggressive liquids, heat or long soaking periods, check the exact sample and cleaning conditions before use. Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis and abrasive cleaning materials. Wipe the optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Ultra-Micro Cuvette.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication requirements. Send your drawing or holder details, critical dimensions, sample conditions and quantity for review.
Send a product-selection enquiry with SKU MQQMC026 and your application details.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.










Reviews
There are no reviews yet.