(MQQFC086) Quartz Flow Cell, 5 mm path, 325 µL nominal capacity, Shorter Path, Wide Optical Window
$216.00
MQQFC086 is a JGS1 quartz flow cell for UV/Vis work with a 5 mm optical path, 325 µL nominal capacity and Two-Way Light configuration. Its 15 mm Z Height and 6.5 × 10 mm optical window suit setups that need a short-path flow cell with a defined beam-center height. The listed price is for 1 piece.
Description
MQQFC086 is a JGS1 quartz flow cell for UV/Vis work that combines a 5 mm optical path, 325 µL nominal capacity and a defined 15 mm Z Height. Its compact body, two top fluid connections and 6.5 × 10 mm optical window make it a practical choice when beam-center position is as important as path length.
- Path Length
- 5 mm
- Sample Volume (Nominal)
- 325 µL
- Opening Configuration
- Two Top Fluid Connections
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 5 mm |
| Light Transmission Configuration | Two-Way Light |
| Z Height | 15 mm |
| Optical Window Dimensions | 6.5 × 10 mm |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 325 µL |
| External Dimensions | 12.5 × 12.5 × 56 mm |
| Body Height | 45 mm |
| Base Dimensions | 12.5 × 12.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Fabrication Method | Standard 80 |
| Opening Configuration | Two Top Fluid Connections |
| Port Layout | Top connection at the left in the referenced original; Top connection at the right in the referenced original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFC086 when your method is built around a 5 mm optical path and your holder or instrument requires a 15 mm beam-center height. This format also helps when you want a compact flow cell with top connections rather than side-fed tubing around the optical faces.
What makes this option different
- 5 mm optical path suits methods that do not use a 10 mm flow direction.
- 15 mm Z Height gives a defined base-to-beam-center alignment value.
- 6.5 × 10 mm optical window provides the stated illuminated face size for alignment planning.
- Two top fluid connections keep the connection area above the compact 12.5 × 12.5 mm body.
Structure and dimensions

Using this cell
Connect the two top fluid ports with the body supported, then fill slowly so the optical region wets completely without trapped bubbles. After the circuit stabilises, run the blank in the same installed position used for the sample.
The 325 µL figure is a nominal capacity, not a verified minimum working volume. Plan your fill and flushing routine so the beam path remains fully covered during measurement, especially if the rest of the fluid line adds dead volume or can retain air.
First-use check
- Inspect the windows, sample region and connection points before assembly.
- Confirm holder fit and beam alignment using the 15 mm Z Height.
- Fill slowly, remove bubbles from the optical region and repeat the blank once the line is stable.
Fit and optical alignment
The external dimensions are 12.5 × 12.5 × 56 mm, with a 45 mm body height. The key fit value for this model is the 15 mm Z Height, so beam alignment should be checked from that dimension rather than from overall height alone.
Allow room above the body for tubing and connectors at the two top fluid connections. This is a Two-Way Light cell, and no pressure limit is established here, so operating limits should be set only after the complete assembled fluid path has been checked.
View the English selection reference.

Solvents and cleaning
Standard 80 is an adhesive-bonded quartz construction. It is commonly chosen for room-temperature water-based samples and buffer systems. Avoid organic samples and organic cleaning solvents with this construction unless suitability for the complete assembly has been checked.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. If your method involves aggressive chemicals, heat or long contact times, ask about a more suitable construction before ordering.
Included with this option
1 Quartz Flow Cell. The listed price is for one cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz projects for changes to path length, body size, window dimensions, Z Height, connections and tolerance requirements. Send your drawing or holder details, sample conditions and quantity through the contact page and reference MQQFC086.
Additional information
| Weight | 50 g |
|---|
You must be logged in to post a review.














Reviews
There are no reviews yet.