(MQQFL005) Quartz Flow Cell, 4/16 mm paths, Wide Tube Connections
$419.00
MQQFL005 is a JGS1 quartz flow cell with 4 mm and 16 mm optical paths in one Four-Way Light body, plus wide opposed quartz tube connections. It is suited to UV/Vis setups that need more than one optical direction and larger tube geometry than a narrow micro-flow cell. Sold as 1 piece.
Description
MQQFL005 combines a 4 mm path and a 16 mm path in one JGS1 quartz flow cell with Four-Way Light access for UV/Vis work. Its opposed quartz tubes and broad internal chamber geometry make it a useful option when both optical layout and fluid connection size matter, not just the headline path length.
This cell is distinct from narrow, top-tube long-path formats. Here, the sample channel and the optical access are built around a wider chamber and opposed end connections, so fixture space, tubing approach and measurement orientation should be planned together.
- Path Length
- 4 mm / 16 mm (dual path)
- Cell Type
- Flow Cell
- Opening Configuration
- Two Opposed Fluid Tubes
Selection Specifications
| Product Kind | Flow Cell |
|---|---|
| Cell Type | Flow Cell |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 4 mm / 16 mm (dual path) |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Internal Dimensions | 16 × 4 × 38 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Port Count | 2 |
| Tube Outer Diameter (OD) | 12 mm |
| Tube Inner Diameter (ID) | 8 mm |
| Fabrication Method | Molded 83 |
| Opening Configuration | Two Opposed Fluid Tubes |
| Fitting Material | Quartz |
| Port Layout | Opposed end A, shown on the left of the exact original; Opposed end B, shown on the right of the exact original |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Flow Cell |
Choose this option
Choose MQQFL005 when your setup needs both 4 mm and 16 mm optical directions in the same flow cell and your fluid line is arranged around opposed end tubes. The 16 × 4 × 38 mm internal dimensions and 12 mm OD / 8 mm ID quartz tubes make this a better fit for assemblies that need a wider flow passage and multi-direction optical access.
What makes this option different
- 4 mm and 16 mm optical paths in one cell body for two optical directions.
- Four-Way Light layout adds side optical access beyond a simple through-path arrangement.
- Opposed quartz tube connections with 12 mm outer diameter and 8 mm inner diameter.
- 16 × 4 × 38 mm internal chamber dimensions that affect both sample handling and optical orientation.
Using this cell
Install the cell with the optical direction you intend to use clearly defined in your method or holder setup. Because this model supports more than one optical direction, it helps to keep a consistent orientation for blank and sample measurements instead of relying on visual memory after the tubing is attached.
Fill and flush gradually so the chamber clears visible bubbles before measurement. Support the cell body during installation and avoid using the opposed quartz tubes as lifting or twisting points.
No pressure limit is stated for this cell. If the flow circuit will operate under pressure, review the complete assembled system under your own tubing and connection conditions before routine use.
First-use check
- Inspect the optical faces, chamber and tube openings before use.
- Mount the cell and verify the intended optical orientation with a suitable blank.
- Flush out visible bubbles and confirm stable baseline conditions in the final tubing setup.
Fit and optical alignment
View the English selection reference.
The internal chamber is listed as 16 × 4 × 38 mm, and the source drawing also shows a 98 mm overall length with a 38 mm central body section between the connection sides. Check holder clearance for the body and the extra length needed for the opposed tube connections and attached tubing.
Z Height is not stated for this model. If your instrument depends on a specific beam-center height, confirm that separately before ordering.

Solvents and cleaning
This model uses Molded 83 construction. This fabrication is commonly chosen for methods involving organic solvents or applications that may involve temperature, while actual suitability still depends on the full sample and cleaning conditions of your process.
Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaners. If your method involves aggressive chemicals, elevated temperature or long contact time, review those conditions before ordering.
Included with this option
1 Quartz Flow Cell. The listed price is for one cell.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
If you need a different path combination, chamber size, tube geometry or mounting envelope, contact us with SKU MQQFL005 and your drawing or labelled sketch. Include the optical direction you plan to use, sample conditions, quantity and any holder constraints that affect the design.
Additional information
| Weight | 120 g |
|---|
You must be logged in to post a review.











Reviews
There are no reviews yet.