Site Navigation

(MQQFL058) Quartz Screw-Top Cuvette, 1 mm path, Valve Closure Assembly

Weight75 g
SKU: MQQFL058

$390.00

In Stock

MQQFL058 is a JGS1 quartz screw-top cuvette with a 1 mm optical path, Four-Way Light layout and a valve closure assembly. Its 350 µL nominal capacity and narrow 12.5 × 3.5 mm base suit UV/Vis and fluorescence setups that need a short path length with controlled top access. Sold as 1 piece with accompanying closure.

In Stock
Add to Wishlist
Add to Wishlist
Shipping and order support
  • Worldwide delivery to door service, hassle free shipping
  • Contact us for quotation of bulk purchase discount
  • Custom design. Send us graphic drawing for solution
  • POs for Academics. Pay after delivery.
  • Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

MQQFL058 is a JGS1 quartz screw-top cuvette with a 1 mm optical path, Four-Way Light layout and a valve closure assembly. The combination of short path length, 350 µL nominal capacity and top-operated sample access makes it useful for UV/Vis and fluorescence work where the sample is handled in an enclosed cell rather than an open chamber. This listing is sold as 1 complete cuvette with its accompanying closure.

Path Length
1 mm
Sample Volume (Nominal)
350 µL
Closure Type
Valve Closure Assembly

Selection Specifications

Product KindCuvette
Cell TypeScrew-Top Cuvette
Measurement ModeFluorescence Spectroscopy; UV/Vis Spectroscopy
Path Length1 mm
Light Transmission ConfigurationFour-Way Light
Wavelength Range — Lower Limit200 nm
Wavelength Range — Upper Limit2500 nm
Sample Volume (Nominal)350 µL
Cell Body Dimensions12.5 × 3.5 × 35 mm
Overall Height without Closure64 mm
Body Height35 mm
Overall Height with Closure81 mm
Base Dimensions12.5 × 3.5 mm
MaterialQuartz
Material GradeJGS1
Closure TypeValve Closure Assembly
Closure IncludedYes
Port ThreadM10
Fabrication MethodMolded 83
Pack Quantity1 Piece
Package Contents1 × Quartz Screw-Top Cuvette; Accompanying closure

Choose this option

Choose MQQFL058 when your method needs a 1 mm quartz cell and the sample is introduced or handled through a top assembly. The narrow base and taller closure assembly mean fit should be judged as a whole-cell decision, not by path length alone.

What makes this option different

  • 1 mm optical path for methods that require a short absorption path.
  • Four-Way Light layout for optical access on four sides of the sample region.
  • Valve closure assembly with M10 threaded top connection for controlled sample access from above.
  • 350 µL nominal capacity with a narrow 12.5 × 3.5 mm base.

Structure and dimensions

Product structure and the listed configuration.
Product structure and the listed configuration.Open image ↗

Using this cell

Fill the cell so the illuminated region is fully covered, then remove bubbles before measurement. Keep the same optical orientation each time you blank and measure, especially when working at a 1 mm path length.

Operate the valve closure carefully while supporting the cell body. If your process depends on a sealed gas or vacuum arrangement, check the complete assembled setup under your own conditions before routine use, because no pressure rating is established here.

First-use check

  1. Inspect the optical faces, valve assembly and sample region for cleanliness and shipping damage.
  2. Place the cell in the holder and confirm stable support plus enough operating space above the instrument or fixture.
  3. Run a blank in the final measurement position, then repeat after filling to confirm bubble-free loading.

Fit and optical alignment

View the English selection reference.

The body height is 35 mm and the overall height with the closure fitted is 81 mm. The base dimensions are 12.5 × 3.5 mm, so holder width, insertion support and clearance above the cell should all be checked together.

Z Height is not established for this SKU, so beam-center compatibility should not be assumed from the outer shape. Four-Way Light supports the general optical access category for this cell, but you should still confirm that your holder and instrument geometry leave the required sides unobstructed.

English selection reference
Selection reference ↗

Solvents and cleaning

Molded 83 is the fabrication category used for this quartz cuvette. For this assembled cell, chemical limits are not established for the exact SKU, so please check the suitability of the complete cell and closure assembly when your sample or cleaning liquid is aggressive, heated or used for extended contact times.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean the optical faces gently with suitable non-abrasive laboratory tissue or swabs.

Included with this option

1 quartz screw-top cuvette with accompanying closure. The listed price is for 1 piece.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving path length, sample volume, external envelope, optical faces, closures or connection details. If you need a different fit, send your holder or apparatus drawing, the critical dimensions, sample conditions and target quantity through this enquiry page and refer to SKU MQQFL058.

Additional information

Weight75 g

Reviews

There are no reviews yet.

Be the first to review “(MQQFL058) Quartz Screw-Top Cuvette, 1 mm path, Valve Closure Assembly”

You may also like…

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare