(MQQFL054) Quartz Screw-Top Cuvette, 1 mm path, Valve Closure Assembly
$390.00
MQQFL054 is a JGS1 quartz screw-top cuvette with a 1 mm optical path, Four-Way Light optical access and a valve closure assembly for UV/Vis and fluorescence work. Its 350 µL nominal capacity and compact body suit short-path measurements in an enclosed cell format. Sold as 1 piece with accompanying closure.
Description
MQQFL054 is a JGS1 quartz screw-top cuvette with a 1 mm optical path, Four-Way Light optical access and a valve closure assembly. It is suited to UV/Vis and fluorescence setups that need short-path measurements in a compact enclosed cell, while still allowing optical access from multiple sides. This option is sold as 1 piece with an accompanying closure.
- Path Length
- 1 mm
- Sample Volume (Nominal)
- 350 µL
- Closure Type
- Valve Closure Assembly
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Screw-Top Cuvette |
| Measurement Mode | Fluorescence Spectroscopy; UV/Vis Spectroscopy |
| Path Length | 1 mm |
| Light Transmission Configuration | Four-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 350 µL |
| Cell Body Dimensions | 12.5 × 3.5 × 35 mm |
| Overall Height without Closure | 64 mm |
| Body Height | 35 mm |
| Overall Height with Closure | 81 mm |
| Base Dimensions | 12.5 × 3.5 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Valve Closure Assembly |
| Closure Included | Yes |
| Port Thread | M10 |
| Fabrication Method | Molded 83 |
| Pack Quantity | 1 Piece |
| Package Contents | 1 × Quartz Screw-Top Cuvette; Accompanying closure |
Choose this option
Choose MQQFL054 when your method calls for a 1 mm path and your setup can use side access as well as the main transmission direction. The valve-style top arrangement is useful when you want controlled sample access through the closure rather than an open chamber, and the 350 µL nominal capacity keeps this as a small-format cell rather than a standard large-volume body.
What makes this option different
- 1 mm optical path for short-path UV/Vis and fluorescence methods.
- Four-Way Light layout for optical access on four sides in compatible measurement geometry.
- Valve closure assembly with M10 thread at the top interface.
- Compact body with 350 µL nominal capacity and 81 mm overall height with cap.
- Molded 83 fabrication category for this SKU.
Structure and dimensions

Using this cell
Fill the cell through the closure arrangement and make sure the illuminated region is fully covered before measurement. For fluorescence or UV/Vis work, keep the same orientation between blank and sample and keep all optical faces clean and dry on the outside.
Support the cell body when operating the closure. This product includes the closure assembly, but no pressure rating or leak-tightness specification is stated here, so it should not be selected on the assumption of a defined pressure or vacuum performance.
First-use check
- Inspect the optical faces, sample chamber and closure interface before use.
- Place the cell in the holder and confirm that it sits securely.
- Run a blank in the intended orientation and verify alignment in your setup.
- After filling, confirm that there are no bubbles or droplets in the optical region.
Fit and optical alignment
View the English selection reference.
Check the holder opening against the 12.5 × 3.5 mm base and the 35 mm body height. Also allow room above the holder for the installed closure assembly, because the full height with cap is 81 mm.
No Z Height is listed for this SKU. If your instrument or accessory has a fixed beam-center requirement, verify that geometry before ordering rather than assuming compatibility from the four-side optical layout alone.

Solvents and cleaning
Molded 83 is often chosen for methods that may involve organic solvents or temperature-related operating conditions, but suitability still depends on the complete assembled cell and the actual liquid conditions used here.
The chemical limits for this exact assembled cell are not specified on this page. For aggressive chemicals, elevated temperature or long contact time, please check the liquid, concentration, temperature and duration before use. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaners, and wipe exterior optical faces gently with non-abrasive optical tissue.
Included with this option
1 Quartz Screw-Top Cuvette and accompanying closure. The listed price is for one piece.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures, connections and tolerances. Send a dimensioned drawing or labelled sketch together with holder details, sample conditions, quantity and delivery destination via our contact page.
Additional information
| Weight | 1750 g |
|---|
You must be logged in to post a review.













Reviews
There are no reviews yet.