(C102CR1) Quartz Standard Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C102CR1

Original price was: $95.00.Current price is: $86.00.

In Stock

C102CR1 is a JGS1 quartz standard cuvette for UV/Vis spectroscopy, with a 10 mm optical path, Two-Way Light layout and 3.5 mL nominal capacity. The listed body dimensions are 12.5 × 12.5 × 45 mm for the uncapped cell, and a closure is included.

In Stock

SKU: C102CR1 Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CR1 is a standard rectangular quartz cuvette for UV/Vis work built around a 10 mm optical path and a Two-Way Light layout. It combines JGS1 quartz with a 3.5 mL nominal capacity in the familiar full-size cuvette format, making it suitable for direct filling and straight-through transmission measurements. A closure is included, and the stated 12.5 × 12.5 × 45 mm dimensions apply to the uncapped cell body.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	190 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes

Choose this option

Choose C102CR1 when your method expects a standard 10 mm quartz cuvette rather than a micro-volume or flow-through design. This option suits routine UV/Vis sample handling with direct top access, a nominal 3.5 mL fill volume and opposite optical faces for conventional transmission readings.

What makes this option different

10 mm optical path: match the measurement method to this transmission distance and align the beam through the sample region.
Two-Way Light: align the opposing optical faces with the transmission beam and use the same orientation for blank and sample readings.
3.5 mL nominal capacity: plan the working fill and beam footprint together so liquid covers the illuminated region; nominal capacity is not a minimum working fill.
Accompanying closure: cover the opening after preparation and allow room to remove it; no pressure or leak-tight rating is specified.

Using this cell

Fill the cuvette from the top so the sample fully covers the beam at the measurement position. Remove visible bubbles before reading, and keep a consistent orientation when comparing blank and sample measurements.

Handle the cuvette by the non-optical outer sides where possible. This helps reduce fingerprints and residue on the measurement faces.

First-use check

Before first use, inspect the optical faces for dust, fingerprints or chips. After rinsing with a suitable blank or solvent for your method, place the filled cuvette in the holder and confirm that the beam passes through a fully filled, bubble-free sample region.

Fit and optical alignment

The stated body dimensions help you check holder fit for the bare cuvette itself. Because the dimensions do not include the closure, review top clearance in your instrument if the compartment lid, clamp or autosampler sits close above the cuvette position.

Z Height is not stated for this item. If your holder or accessory requires a defined beam height, confirm that point in your own setup instead of assuming alignment from the outer body size alone.

Solvents and cleaning

The exact chemical limits for this assembled cell are not established here, so choose sample and cleaning conditions with the full cell-and-closure assembly in mind. If your application includes aggressive solvents, mixed chemicals, heat or long contact times, please check those conditions before ordering.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. For general fabrication background, see Compare fabrication methods.

Included with this option

This configuration includes an accompanying closure. Confirm the cell quantity and any separately specified accessories covered by your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

For a different design, send a drawing or describe the change you need. Custom JGS1 quartz enquiries are assessed separately from this listed specification, including changes to dimensions, optical path, volume, windows, Z Height, closures or connections.