(C022SF) Quartz Stoppered Cuvette, 2 mm Path
10%
Original price was: $228.00.$206.00Current price is: $206.00.
C022SF is a JGS1 quartz stoppered cuvette for UV/Vis spectroscopy with a 2 mm optical path and Two-Way Light transmission geometry. Its short path and covered sample chamber suit methods that require a stoppered quartz cell in this path-length format. Sold as 1 cuvette per listed price unit.
In Stock
Description
C022SF is a JGS1 quartz stoppered cuvette for UV/Vis spectroscopy with a 2 mm optical path. It suits methods that need a short transmission distance in a covered quartz cell, with Two-Way Light geometry for straight-through measurement across two opposite optical faces. This listing is sold as 1 cuvette per price unit.
- Path Length
- 2 mm
- Sample Volume (Nominal)
- 700 µL
- Closure Type
- Stopper
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Stoppered Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 2 mm |
| Light Transmission Configuration | Two-Way Light |
| Sample Volume (Nominal) | 700 µL |
| Material | Quartz |
| Material Grade | JGS1 |
| Closure Type | Stopper |
| Closure Included | Yes |
| Fabrication Method | Molded 83 |
Choose this option
Choose C022SF when your method specifies a 2 mm path and you want a stoppered quartz cell rather than an open-top body. The short path is useful for samples that are too absorbent for a longer transmission cell, while the stopper keeps the sample covered during filling, transfer and measurement.
What makes this option different
- 2 mm optical path for methods that require a short transmission distance.
- Two-Way Light geometry for direct transmission measurement through two opposite optical faces.
- Stoppered format with closure included for covered sample handling.
- JGS1 quartz construction for UV/Vis spectroscopy.
- Molded 83 fabrication based on optical-contact integrated construction for this SKU.
- MQ sale unit of 1 cuvette per listed price unit.
Using this cell
Fill the cell so the liquid fully covers the beam path, then insert the stopper carefully. Remove visible bubbles before measurement and keep the same orientation when your method depends on consistent blank and sample handling.
Handle the cuvette by the non-optical surfaces and keep the optical faces clean and dry. The stopper covers the opening during routine use, but it should not be treated here as a pressure-rated or transport-sealed closure.
First-use check
Before first use, inspect the optical faces for dust or handling residue and make sure the stopper seats properly. Run a blank in the intended orientation and verify that the filled sample region is free of trapped bubbles across the beam path.
Fit and optical alignment
Use the 2 mm path length specified for your method setup and calculations. This page does not establish the Z Height for this exact option, so if your holder or instrument uses a fixed beam position, confirm the beam alignment requirement before ordering.
Exterior fit dimensions are not established here for customer use. If your holder has tight clearance limits, please check fit requirements before purchase rather than relying on general cuvette appearance.
Solvents and cleaning
Molded 83 is commonly selected for quartz cuvette applications that may involve organic-solvent methods and temperature-related laboratory work. For this exact assembled cell, however, the chemical limits are not specified here, so check suitability if your sample or cleaning routine involves aggressive chemicals, unusual concentrations, elevated temperature or extended contact time.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with suitable non-abrasive laboratory or optical wipes.
Included with this option
1 cuvette per listed price unit. A closure is included.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
For a different design, send a drawing or describe the change you need. Custom JGS1 quartz enquiries are assessed separately from this listed specification; feasibility, quantity, price and timing are confirmed in the project quotation.
Additional information
| Weight | 30 g |
|---|---|
| Dimensions | 0.45 × 1.25 × 4.5 mm |
You must be logged in to post a review.
You may also like…
10%
(C022SS1) Quartz Micro Cuvette, 2 mm Path, 700 µL
Original price was: $228.00.$206.00Current price is: $206.00.10%
(C022SS2) Quartz Micro Cuvette, 2 mm Path, 700 µL, Pack of 2
Original price was: $456.00.$411.00Current price is: $411.00.Related products
14%
(MQC366) Quartz Capillary Tubes (Square), Outer Dim.: 0.95×0.95mm, Inner Dim.: 0.35×0.35mm, Length: 100mm
Original price was: $38.00.$33.00Current price is: $33.00.15%
(MQC379) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.2×0.2mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.15%
(MQC381) Quartz Capillary Tubes (Square), Outer Dim.: 1x1mm, Inner Dim.: 0.3×0.3mm, Length: 50mm
Original price was: $28.00.$24.00Current price is: $24.00.14%
Reviews
There are no reviews yet.