(C102CS3) Quartz Standard Cuvette, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C102CS3

Original price was: $128.00.Current price is: $116.00.

In Stock

C102CS3 is a JGS1 quartz standard cuvette for UV/Vis spectroscopy with a 10 mm optical path and 3.5 mL nominal capacity. The open rectangular cell is filled from the top and supplied with a lid for covered handling during routine use. This listing covers the C102CS3 cuvette body and lid.

In Stock

SKU: C102CS3 Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102CS3 is a JGS1 quartz standard cuvette for UV/Vis work across 190–2500 nm. It combines a 10 mm optical path with a 3.5 mL nominal capacity in a full-size rectangular cell, making it a practical choice when your method is written for a standard 10 mm cuvette and you want straightforward top filling with simple cover placement after loading.

The lid covers the opening during routine handling, but the cell remains a top-access format rather than a sealed or pressure-rated assembly. The stated 3.5 mL figure is the nominal capacity of the cell, not a minimum working volume, so final fill level still depends on your beam position and method setup.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Standard Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	190 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3.5 mL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes

Choose this option

Choose C102CS3 when you need the familiar 10 mm absorbance path in a standard quartz cell and want enough nominal capacity for ordinary top-filled UV/Vis measurements without moving to a special micro-volume format. The covered opening is useful when you prepare blanks and samples by pipette or transfer them manually between steps, while keeping the cell easy to rinse and inspect.

What makes this option different

10 mm optical path suits methods written around the standard rectangular cuvette format.
3.5 mL nominal capacity gives a full-size sample chamber for routine top filling; it should not be treated as the minimum fill needed for measurement.
Lid closure covers the opening after filling while leaving direct access from the top during loading and cleaning.
JGS1 quartz body supports UV/Vis use over the stated 190–2500 nm range.
Uncapped body dimensions of 12.5 × 12.5 × 45 mm help you check holder seating separately from lid clearance above the cell.

Using this cell

Fill from the top and make sure the liquid level fully covers the measurement beam in your setup. For routine absorbance work, keep the same orientation for blank and sample, remove visible bubbles before reading, and handle the cell by the non-optical sides to keep the windows clean.

Place the lid after filling when you want simple top coverage during transfer or measurement setup. Because the working fill requirement is not established here, do not use the nominal 3.5 mL capacity as a substitute for your instrument’s actual beam height and method conditions.

First-use check

Inspect the cuvette body and lid for chips, cracks, residue or other visible damage.
Test the empty cell in your holder to confirm stable seating and enough top clearance for your handling routine.
Rinse appropriately for your method and run a blank before measuring samples.

Fit and optical alignment

The stated external dimensions are 12.5 × 12.5 × 45 mm for the uncapped cell body. This is useful for checking holder seating, but it does not include the lid or any extra top clearance you may need once the cell is covered.

Z Height is not stated for this SKU. If your instrument, sipper accessory or holder depends on a defined beam-center height, verify that requirement before ordering rather than relying on the outer body size alone.

Solvents and cleaning

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the outside optical faces gently with non-abrasive optical tissue.

The chemical limits of this exact assembly are not established here, so if your samples or cleaning routine involve aggressive solvents or demanding conditions, check suitability before ordering. For general construction background, see Compare fabrication options.

Included with this option

This option includes the C102CS3 cuvette body and a lid. Package quantity and any other included accessories are not specified here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and tolerance needs. Send a dimensioned drawing or labelled sketch together with your instrument or holder details, sample conditions and target quantity via our contact page, and quote part number C102CS3.