(C014CS1) Quartz Screw-Top Cuvette, 1 mm Path, 350 µL, Pack of 2

Weight	30 g
Dimensions	1.25 × 0.35 × 5.5 mm

SKU: C014CS1

Original price was: $569.00.Current price is: $513.00.

In Stock

C014CS1 is a JGS1 quartz screw-top cuvette with a 1 mm optical path, Four-Way Light access and 350 µL nominal capacity for UV/Vis spectroscopy. Its threaded neck with PTFE cap gives you covered filling through a defined opening, and the compact body helps when space around the holder is limited. Supplied as a pack of 2 cuvettes.

In Stock

SKU: C014CS1 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C014CS1 is a JGS1 quartz screw-top cuvette for UV/Vis work that needs a short 1 mm optical path in a covered format. This version combines Four-Way Light access, a 350 µL nominal capacity and a threaded neck with an included PTFE cap, so you can fill through the neck and close the sample chamber for routine handling. It is supplied as a pack of 2 cuvettes.

Path Length: 1 mm
Sample Volume (Nominal): 350 µL
Opening Configuration: Threaded Neck

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	1 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
External Dimensions	12.5 × 3.5 × 54 mm
Cell Body Dimensions	12.5 × 3.5 × 38 mm
Overall Height without Closure	54 mm
Body Height	38 mm
Overall Height with Closure	58 mm
Base Dimensions	12.5 × 3.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Molded 83
Opening Configuration	Threaded Neck

Choose this option

Choose this cell when your method uses a short transmission path but you do not want an open-top chamber. The threaded neck gives you a defined access point for filling and emptying, while the Four-Way Light body keeps optical access available from four sides. The 350 µL nominal capacity suits small prepared samples, but it should be treated as a nominal cell capacity rather than a minimum working fill.

What makes this option different

Threaded neck with PTFE cap gives you covered sample access through a fixed opening, which is useful when you want a screw-on closure rather than an open cell top.
Four-Way Light configuration provides optical access from four sides of the body for setups that use this beam geometry.
1 mm optical path suits methods that call for a short path length in a full screw-top cell format.
350 µL nominal capacity supports small-volume preparation while still using a complete rectangular cuvette body.
Optical contact / integrated construction is the stated construction for this SKU, paired here with the Molded 83 fabrication designation used for selection discussions involving solvent method planning and cleaning approach.
Compact body section helps when checking holder space around the cell body, with height and cap clearance considered separately.
Pack of 2 cuvettes is the priced sale unit for this listing.

Using this cell

Fill the sample through the threaded neck, then fit the PTFE cap when your procedure calls for the chamber to be covered during handling or measurement. Keep the optical faces clean and orient the cell consistently in the holder so blank and sample are presented the same way.

The 350 µL figure is the nominal capacity of the cell. Minimum working volume is not established here, so in actual use you should check that your fill level fully covers the beam position required by your instrument.

First-use check

Before first use, inspect the optical faces and neck for dust or handling marks, rinse with a cleaning method suitable for your procedure, and check that the cap threads on smoothly. Then verify in your instrument that the filled sample reaches the beam area you intend to use.

Fit and optical alignment

The rectangular body is compact, with a 12.5 × 3.5 mm body section and a 38 mm body height. Overall height is 54 mm without the cap and 58 mm with the cap fitted, which helps when checking holder depth and vertical clearance above the neck.

Z Height is not specified for this item. If your instrument or accessory depends on a defined beam-center height, confirm that requirement before ordering rather than assuming alignment from the outside dimensions alone.

Solvents and cleaning

This cuvette is described with optical contact / integrated construction and the Molded 83 fabrication designation. In selection terms, that designation is commonly chosen for methods that may involve organic-solvent handling, but suitability still depends on the complete assembly and the actual sample, cleaning solvent, contact time and conditions used.

For routine care, clean the quartz surfaces gently and avoid hydrofluoric acid, hot strong alkalis and abrasive cleaning materials. Chemical compatibility for this exact cuvette assembly is not established for this SKU, so specific solvent or cleaning plans should be checked for the complete cell and cap arrangement before use.

Included with this option

Supplied as 2 screw-top cuvettes with PTFE closures included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for changes involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connection details, fabrication and tolerance requirements. Send a dimensioned drawing or labelled sketch together with holder information, application wavelength, sample conditions and target quantity. Discuss your requirements and quote part number C014CS1.