(C014CS3) Quartz Screw-Top Cuvette, 1 mm Path, 350 µL

Weight	30 g
Dimensions	1.25 × 0.35 × 5.5 mm

SKU: C014CS3

Original price was: $209.00.Current price is: $189.00.

In Stock

C014CS3 is a JGS1 quartz screw-top cuvette with a 1 mm optical path, Two-Way Light geometry and 350 µL nominal capacity. Its threaded neck and included PTFE screw cap suit covered sample handling in a compact transmission cell. Supplied as 1 cuvette.

In Stock

SKU: C014CS3 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C014CS3 is a compact screw-top quartz cuvette for transmission measurements that use a 1 mm optical path. This version combines JGS1 quartz, Two-Way Light geometry, a 350 µL nominal capacity and an included PTFE screw cap, giving you a covered sample cell with a straightforward opposing-face optical layout. It is sold as 1 cuvette.

Path Length: 1 mm
Sample Volume (Nominal): 350 µL
Opening Configuration: Threaded Neck

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	1 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
Cell Body Dimensions	12.5 × 3.5 × 38 mm
Overall Height without Closure	54 mm
Body Height	38 mm
Overall Height with Closure	58 mm
Base Dimensions	12.5 × 3.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Material	PTFE
Closure Included	Yes
Fabrication Method	Molded 83
Opening Configuration	Threaded Neck

Choose this option

Choose C014CS3 when you need a short-path screw-top cuvette for a standard two-direction transmission setup. The 1 mm path suits short-path methods, and the capped threaded-neck format is useful when you want to fill, cover and move the cell as one piece instead of working with an open sample chamber.

What makes this option different

1 mm optical path for short-path measurement methods.
Two-Way Light configuration for opposing-face transmission geometry.
Threaded neck with PTFE screw cap included for covered sample loading and handling.
350 µL nominal capacity in a compact rectangular quartz body.

Using this cell

Fill through the threaded neck, then fit the cap when your procedure calls for the sample to remain covered during handling or measurement. Keep the two optical faces clean and dry on the outside, and remove bubbles from the light path before inserting the cuvette into the holder.

The stated 350 µL is a nominal capacity for the cell body. It does not define a minimum working volume, so if you plan to work near a low fill level, check that the liquid height in use will cover the beam path in your instrument.

First-use check

Before first use, inspect the optical faces for dust, residue or scratches from handling. Rinse with a solvent suitable for your method, run a blank in the same orientation you will use for the sample, and check that the filled sample reaches the beam area.

Fit and optical alignment

The body is 12.5 × 3.5 × 38 mm, with a 54 mm overall height without the cap and 58 mm with the cap fitted. These figures are useful for checking holder clearance and the space needed above the cell position if you intend to measure with the cap left on.

Z Height is not stated for this SKU. If your instrument or holder requires a defined beam-center height from the base, confirm that point before ordering rather than relying on the external body dimensions alone.

Solvents and cleaning

This cuvette falls under the Molded 83 fabrication category. It is generally chosen for quartz cuvette work that may include organic-solvent methods, but the exact solvent, concentration, temperature, contact time and full cap compatibility are not specified here for the assembled cell.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean the optical faces gently with non-abrasive laboratory tissue or another soft, non-scratching wipe.

Included with this option

Price is for 1 cuvette. A PTFE screw cap is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions for changes to path length, body size, sample volume, optical layout, Z Height, closure style and tolerances. Send a dimensioned drawing or labelled sketch and your holder or instrument details through our contact page, referencing C014CS3.