(C024CR3) Quartz Rectangular Sample Cell, 2 mm Path, 700 µL, Pack of 2

Weight	30 g

SKU: C024CR3

Original price was: $148.00.Current price is: $134.00.

In Stock

C024CR3 is a pack of 2 JGS3 quartz rectangular sample cells for infrared spectroscopy and visible absorbance measurements. Each cell combines a 2 mm optical path, Two-Way Light transmission, a 700 µL nominal capacity and an included closure in a slim 12.5 × 4.5 × 45 mm body. Supplied as 2 cuvettes per listed price unit.

In Stock

SKU: C024CR3 Categories: Cuvettes, Products, Quartz Standard Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C024CR3 is a pack of 2 JGS3 quartz rectangular sample cells for infrared spectroscopy and visible absorbance work. Each cell combines a 2 mm optical path, Two-Way Light transmission and a 700 µL nominal capacity in a slim 12.5 × 4.5 × 45 mm rectangular body. This option suits labs that want the same cell format available in two physical pieces for paired work, duplicate preparation or keeping one ready as a spare.

Path Length: 2 mm
Sample Volume (Nominal): 700 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Rectangular Sample Cell
Measurement Mode	Infrared Spectroscopy; Visible Absorbance Spectroscopy
Pack Quantity	Pack of 2
Path Length	2 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	260 nm
Wavelength Range — Upper Limit	3500 nm
Sample Volume (Nominal)	700 µL
External Dimensions	12.5 × 4.5 × 45 mm
Cell Body Dimensions	12.5 × 4.5 × 45 mm
External Dimensions Scope	Body Only
Material	Quartz
Material Grade	JGS3
Closure Type	Lid
Closure Included	Yes

Choose this option

Choose C024CR3 when your method is written for a 2 mm rectangular transmission cell and you want two cuvettes under one listed price unit. The JGS3 quartz body is specified for use from 260 to 3500 nm, covering infrared measurements as well as visible absorbance work. The included closure and compact body style make it suitable for routine top-loading sample handling in this short-path format.

What makes this option different

2 cuvettes per listed price unit for paired routine use, duplicate preparation or backup handling.
2 mm optical path for methods built around a short rectangular transmission length.
700 µL nominal capacity in a slim rectangular body for compact sample handling.
Two-Way Light configuration with opposed optical faces for transmission measurements.

Using this cell

Fill each cell so the sample covers the beam area before measurement, and use the 2 mm path length in your method calculations. Remove visible bubbles and keep the cell orientation consistent between blank and sample runs.

With a two-cuvette sale unit, one piece can be kept for blanks or duplicate preparation while the second remains available for sample measurement or reserve use. Handle the cells by the non-optical surfaces where possible to keep the optical faces clean.

First-use check

Inspect both cells on arrival, then rinse and run a blank before routine use. Confirm that each cell seats correctly in your holder and that the beam passes through the intended optical faces without residue or bubbles in the sample region.

Fit and optical alignment

The listed 12.5 × 4.5 × 45 mm dimensions apply to the body of each cell only. Check holder width, seating depth and top clearance if your instrument compartment is closely fitted, because the stated size does not define the closure height above the body.

Z Height is not specified for this SKU. If your holder or instrument requires a defined beam-center height, confirm that requirement before ordering.

Solvents and cleaning

This quartz cell style is intended for infrared and visible transmission use, but the chemical limits for this exact SKU are not stated here. If your sample matrix or cleaning procedure involves aggressive chemicals, heating or long contact time, review suitability before routine use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. For general background on MQ cuvette construction options, see fabrication method of cuvettes.

Included with this option

2 cuvettes per listed price unit. Closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, body size, sample volume, optical window arrangement, Z Height or closure style, we can review a custom JGS1 quartz version. Please send your drawing or labelled sketch, holder or instrument details, key dimensions and tolerances, sample conditions and target quantity through our contact page, and quote part number C024CR3.