(C0.22WS1) Quartz Demountable Cuvette, 0.2 mm Path, 16 µL

Weight	30 g

SKU: C0.22WS1

Original price was: $180.00.Current price is: $162.00.

In Stock

C0.22WS1 is a quartz demountable cuvette with a 0.2 mm optical path, 16 µL nominal capacity and Two-Way Light layout. Its demountable form and two opposed tube openings suit setups that need a short optical path with connected flow access. Order quantity and supplied components for this listing should be confirmed before purchase.

In Stock

SKU: C0.22WS1 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C0.22WS1 is a quartz demountable cuvette for short-path measurements with a 0.2 mm optical path and 16 µL nominal capacity. Its Two-Way Light layout and two opposed tube openings make it useful when you need a defined optical path together with tubing access through the cell structure.

This version uses an adhesive-bonded quartz construction mapped to Standard 80. That matters when you are selecting for sample chemistry as well as geometry, especially in water-based methods at room temperature.

Path Length: 0.2 mm
Sample Volume (Nominal): 16 µL
Opening Configuration: Two Tube Openings and Removable Cover Plate

Selection Specifications

Product Kind	Flow Cell
Cell Type	Demountable Cuvette
Measurement Mode	UV/Vis Spectroscopy
Path Length	0.2 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	16 µL
Material	Quartz
Closure Type	Removable Cover Plate
Port Count	2
Fabrication Method	Standard 80
Opening Configuration	Two Tube Openings and Removable Cover Plate

Choose this option

Choose C0.22WS1 when your method calls for a very short 0.2 mm path in a demountable flow-cell format rather than a simple open-top cuvette. The two tube openings at opposed ends support connection planning on both sides of the cell, while the 16 µL nominal capacity keeps the sample region in the small-volume range. This is a good fit for users who already know they need this short optical path and want a quartz cell built around connected flow access.

What makes this option different

0.2 mm optical path for methods that require a very short transmission distance.
16 µL nominal capacity in a compact sample region.
Two-Way Light configuration for a defined opposing optical path through the cell.
Two tube openings on opposed ends to help plan tubing access and connection direction around the holder.

Using this cell

Handle the optical faces carefully and keep all sample-contact areas clean during assembly and use. Connect tubing with attention to strain and routing so the cell is not twisted or stressed once installed.

Fill and run the cell in a way that suits your own method, then check the illuminated region for trapped bubbles before measurement. The 16 µL figure is a nominal chamber volume, not a minimum working volume, so final fill conditions should be matched to your beam size and operating procedure.

First-use check

Inspect the quartz surfaces for dust, residue, edge damage or chips.
Assemble the cell carefully and make sure the optical path is clear.
Run a suitable blank and confirm that no bubbles or leakage are affecting the measurement area.

Fit and optical alignment

Match this cell to your instrument holder before ordering. The optical layout is Two-Way Light, but external dimensions and Z Height are not established here, so body clearance and beam-center alignment should be checked directly rather than assumed from the path length alone.

The two ports are positioned at opposed ends as shown for this item. If your setup has fixed tubing runs, limited side clearance or a tightly defined holder space, allow room for both the cell body and the connected lines.

Solvents and cleaning

Standard 80 is the MQ fabrication option for routine water-based samples and buffers at room temperature. Avoid organic sample solvents and organic cleaning agents with this adhesive-bonded construction.

Do not use hydrofluoric acid on quartz, and avoid hot strong alkalis and abrasive cleaning. After use, rinse promptly with a suitable non-organic cleaning liquid for your method and wipe exterior optical faces gently with non-abrasive optical tissue.

Included with this option

The listed price is for one C0.22WS1 flow cell.

Additional accessory contents should be confirmed for your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, connection arrangement, body fit or other dimensional change, send a dimensioned drawing or labelled sketch and identify the dimensions that matter for your holder and optical setup. Modified designs and prototype quantities are quoted separately from the listed SKU. Discuss your requirements and quote part number C0.22WS1.