(C102WS7) Quartz Flow Cell, 10 mm Path, 3.5 mL

Weight	30 g

SKU: C102WS7

Original price was: $167.00.Current price is: $151.00.

In Stock

JGS1 quartz flow cell for UV/Vis spectroscopy with a 10 mm optical path, 3.5 mL nominal capacity and Two-Way Light layout. Two opposed fluid tubes with 8 mm OD and 6 mm ID suit setups that need a larger straight-through connection format. Sold as the specified C102WS7 flow cell configuration.

In Stock

SKU: C102WS7 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102WS7 is a JGS1 quartz flow cell for UV/Vis spectroscopy with a 10 mm optical path and 3.5 mL nominal capacity. Its Two-Way Light layout and opposed tube connections make it a straightforward flow-through option when you want the sample line to run directly through the cell body. The larger 8 mm OD / 6 mm ID tube size is a key part of the selection for installations that need a larger connection format.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Opening Configuration: Two Opposed Fluid Tubes

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	3.5 mL
Material	Quartz
Material Grade	JGS1
Port Count	2
Tube Outer Diameter (OD)	8 mm
Tube Inner Diameter (ID)	6 mm
Fabrication Method	Molded 83
Opening Configuration	Two Opposed Fluid Tubes

Choose this option

Choose C102WS7 when your method is built around a 10 mm transmission path and you want a straight opposed-tube flow cell rather than a top-access format. The 3.5 mL nominal capacity and larger tube dimensions make it easier to plan the cell together with pump lines, tubing runs and connected fittings.

What makes this option different

10 mm optical path for methods based on a standard transmission distance.
Two-Way Light layout for direct transmission through one defined optical path.
3.5 mL nominal capacity in a flow-through quartz cell body.
Opposed 8 mm OD / 6 mm ID tubes for larger straight-through fluid connections.

Using this cell

Connect the cell into the liquid line with the two tube ends aligned to your intended flow direction. Fill slowly, then inspect both the optical region and the connected tubing for trapped bubbles before collecting a blank and sample sequence.

The nominal 3.5 mL volume applies to the cell itself, not to the full volume of the installed fluid circuit. The two tube connections are the available fluid ports, but no inlet or outlet role is assigned here.

First-use check

Inspect the optical faces and tube ends for chips, residue or shipping damage.
Test the connection layout with a compatible blank liquid before introducing sample.
Confirm that the illuminated region is fully filled and free of visible bubbles.

Fit and optical alignment

Check the installed clearance for the whole connection layout, not just the central body. The tube projections affect how the cell sits inside a compartment or fixture, and the bend space needed for connected tubing can matter as much as the body size.

Z Height is not specified here. If your holder or instrument depends on a defined beam-center height, please check that before ordering.

Solvents and cleaning

Molded 83 is commonly selected for methods involving organic solvents and for applications where temperature control may be part of the setup. Choose cleaning and sample conditions for the entire wetted assembly, including tubing and fittings connected to the cell.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with suitable non-abrasive wipes or optical tissue.

Included with this option

The listed price is for one C102WS7 flow cell.

Additional accessory contents should be confirmed for your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz versions based on dimensions, path length, sample volume, optical windows, Z Height, connections and fabrication requirements. Send a dimensioned drawing or labelled sketch together with your tubing layout, holder details, sample conditions and target quantity.

Discuss your requirements and quote part number C102WS7.