(C37.52CR) Quartz Large-Window Cuvette, 37.5 mm Path, 5.4 mL
Original price was: $90.00.$81.00Current price is: $81.00.
C37.52CR is a JGS1 quartz large-window cuvette for UV/Vis work with a 37.5 mm optical path, Two-Way Light layout and 5.4 mL nominal capacity. Its open-top body gives direct access to the long, narrow sample chamber for filling, rinsing and visual checks. Sold per 1 cuvette.
Description
C37.52CR is a JGS1 quartz large-window cuvette for UV/Vis spectroscopy across the stated 200–2500 nm range. It combines a 37.5 mm optical path with a 5.4 mL nominal capacity in an open-top body, so you can work with a longer transmission length while keeping direct access to the sample chamber.
- Path Length
- 37.5 mm
- Sample Volume (Nominal)
- 5.4 mL
- Opening Configuration
- Open Top (Cell Body)
Selection Specifications
| Product Kind | Cuvette |
|---|---|
| Cell Type | Large-Window Cuvette |
| Measurement Mode | UV/Vis Spectroscopy |
| Path Length | 37.5 mm |
| Light Transmission Configuration | Two-Way Light |
| Wavelength Range — Lower Limit | 200 nm |
| Wavelength Range — Upper Limit | 2500 nm |
| Sample Volume (Nominal) | 5.4 mL |
| External Dimensions | 40 × 8 × 35 mm |
| Uncapped Cell Dimensions | 40 × 8 × 35 mm |
| Overall Height without Closure | 35 mm |
| External Dimensions Scope | Uncapped Cell |
| Body Height | 35 mm |
| Internal Dimensions | 37.5 × 5.5 × 33 mm |
| Material | Quartz |
| Material Grade | JGS1 |
| Opening Configuration | Open Top (Cell Body) |
Choose this option
Choose C37.52CR when your method is specified around a 37.5 mm path and you want a straightforward transmission cell rather than a closed or flow-through format. The internal dimensions of 37.5 × 5.5 × 33 mm create a long, slim sample region, which is useful when the optical path matters as much as the chamber shape and access from above.
What makes this option different
- 37.5 mm optical path for methods written around this transmission length.
- 5.4 mL nominal capacity in a long, narrow internal chamber.
- Open-top body for direct filling, emptying and rinsing access.
- Two-Way Light layout for transmission measurements through opposite optical faces.
Using this cell
Fill the cell from the open top and make sure the liquid covers the beam during measurement. Before reading, remove visible bubbles from the optical region and keep the same orientation for blank and sample if your method depends on repeatable positioning.
The stated 5.4 mL is the nominal cell capacity, not a minimum working volume. If you plan to use less than the nominal fill, check that the liquid level still covers the beam in your instrument.
First-use check
Inspect the optical faces on arrival, rinse with a cleaning liquid suitable for your method, and run a blank before sample measurements. Confirm that the beam passes through a fully covered, bubble-free sample region.
Fit and optical alignment
The listed outer dimensions of 40 × 8 × 35 mm apply to the uncapped cell body. Use these dimensions to check holder width, compartment clearance and handling space, especially where the body depth is limited.
Z Height is not listed for this SKU. If your holder or spectrometer depends on a defined beam-center height, please confirm that separately rather than assuming fit from the body size alone.
Solvents and cleaning
This cuvette is made from JGS1 quartz. For general fabrication guidance across cuvette types, see Compare fabrication options.
Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces with non-abrasive optical tissue only. If your samples or cleaning routine involve aggressive chemicals or prolonged contact conditions, please check suitability before ordering.
Included with this option
1 cuvette per listed price unit. If you need a supplied closure or other accessory, contact us before ordering.
Availability and ordering
Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.
Discuss a custom version
We also review custom JGS1 quartz cuvette requests involving path length, chamber dimensions, sample volume, openings and holder-related fit. Send your drawing or labelled sketch together with holder details, wavelength range and sample conditions via our contact page, and mention part number C37.52CR.
Additional information
| Weight | 100 g |
|---|
You must be logged in to post a review.






Reviews
There are no reviews yet.