(C104CA3) Quartz Fluorescence Cuvette, 10 mm / 25 mm (dual path) Path, 9 mL, Pack of 2

Weight	100 g

SKU: C104CA3

Original price was: $293.00.Current price is: $264.00.

In Stock

C104CA3 is a JGS1 quartz fluorescence cuvette with a dual-path layout: 10 mm on one optical axis and 25 mm on the other in one Four-Way Light body. Its open-top format and 9 mL nominal capacity suit fluorescence work that needs direct filling and a larger sample chamber than a compact square cell. Supplied as a pack of 2 cuvettes.

In Stock

SKU: C104CA3 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CA3 is a JGS1 quartz fluorescence cuvette for setups that use two labelled optical paths in one cell body. It combines a 10 mm path on one axis with a 25 mm path on the other, in a Four-Way Light format with direct top access to the sample chamber. The 9 mL nominal capacity and rectangular uncapped body make it a practical choice when your method needs more sample space and a specific fluorescence viewing geometry.

Path Length: 10 mm / 25 mm (dual path)
Sample Volume (Nominal): 9 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm / 25 mm (dual path)
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	9 mL
External Dimensions	12.5 × 27.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 27.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Opening Configuration	Open Top

Choose this option

Choose C104CA3 when your method is built around a Four-Way Light fluorescence cell and you need the 10 mm / 25 mm dual-path arrangement rather than a single-path square cuvette. The open top makes filling, rinsing and visual checking straightforward, and the wider body is useful when you want a larger nominal chamber volume in the same cell.

What makes this option different

Two labelled optical paths in one cell: 10 mm on one axis and 25 mm on the other.
Four-Way Light body for fluorescence measurements that use optical access from multiple sides.
9 mL nominal capacity in a rectangular format rather than a compact 10 × 10 mm square body.
Sold as 2 physical cuvettes per price unit.

Using this cell

Fill the cell from the open top and keep the same face orientation for blank and sample runs. In fluorescence work, place the cuvette so the intended excitation and observation directions use the correct optical axis, then check that the beam area is free of bubbles, droplets and dried residue.

The 9 mL figure is the nominal cell capacity, not a minimum working volume. If your method uses a low fill level or depends on a defined beam height, check that the liquid level in use will fully cover the measurement region.

First-use check

Inspect the optical faces and rim for chips, scratches or handling residue.
Rinse the wetted surfaces with a cleaning liquid suitable for your method.
Place the cell in the holder and confirm the intended 10 mm and 25 mm orientation before measurement.
Run a blank with the cell filled to a level that covers the measurement zone.

Fit and optical alignment

The listed external dimensions are for the uncapped cell body: 12.5 × 27.5 × 45 mm. Use those dimensions to review holder seating, side clearance and access around the longer body shape, especially if your compartment or fixture is designed around a narrower fluorescence cell.

Z Height is not established for this SKU, so overall body height should not be used as a substitute for beam-center fit. A closure is stated as included, but the body dimensions above do not include any installed closure, so allow extra top clearance where needed.

Solvents and cleaning

This cuvette is specified in quartz for use across the stated 200–2500 nm range. For general background on construction approaches, see Compare fabrication options. Chemical limits for this exact SKU are not established here, so match both sample liquids and cleaning steps to the full wetted assembly before use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive optical tissue and do not allow residues to dry on the windows after use.

Included with this option

Price is for 2 cuvettes, supplied as this listed C104CA3 option.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz cuvette projects for changes involving dimensions, optical path length, sample volume, optical windows, Z Height, closures, connections and tolerance requirements. Send a dimensioned drawing or labelled sketch together with holder details, wavelength range, sample conditions and target quantity. Discuss your requirements and mention part number C104CA3.