(C104CD5) Quartz Ultra-Micro Cuvette, 10 mm Path, 200 µL

Weight	30 g

SKU: C104CD5

Original price was: $171.00.Current price is: $154.00.

In Stock

C104CD5 is a quartz ultra-micro cuvette with a 10 mm optical path, 200 µL nominal capacity and Four-Way Light geometry. Its open-top body and 15 mm Z Height suit direct filling and beam-height planning in a compact 12.5 × 12.5 × 45 mm cell body. Sold as 1 cuvette per sale unit.

In Stock

SKU: C104CD5 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CD5 is a quartz Ultra-Micro Cuvette with a 10 mm optical path, 200 µL nominal capacity and Four-Way Light configuration. The open-top body gives direct access for filling and rinsing, while the 15 mm Z Height helps you check beam position against your holder or instrument before ordering.

This option is sold as 1 cuvette per sale unit. Its 12.5 × 12.5 × 45 mm body gives a clear mechanical reference when you need to check seating, side clearance and top access around a compact cell.

Path Length: 10 mm
Sample Volume (Nominal): 200 µL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Ultra-Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Z Height	15 mm
Sample Volume (Nominal)	200 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Body Only
Material	Quartz
Opening Configuration	Open Top

Choose this option

Choose C104CD5 when your method needs a 10 mm path in an ultra-micro format with top access and optical access from four sides. The 200 µL nominal capacity is useful for planning sample preparation and handling, and the 15 mm beam-centre height is the key dimension to compare with your instrument beam position.

What makes this option different

Open-top chamber allows direct pipetting and visual checking during filling and rinsing.
10 mm optical path suits methods written around this path length in a smaller-volume cell format.
Four-Way Light design provides optical access from four sides for measurement layouts that need side access beyond one beam direction.
15 mm Z Height gives a base-to-optical-centre reference for beam alignment.
12.5 × 12.5 × 45 mm body helps you check holder seating and surrounding clearance in advance.
200 µL nominal capacity supports small-volume handling without changing to a flow-cell layout.

Using this cell

Fill from the open top and make sure the illuminated sample region is fully covered during measurement. Avoid bubbles, droplets and dried residue on the optical faces, and keep the same orientation for blank and sample when your method depends on consistent positioning.

The stated 200 µL value is a nominal capacity, not a minimum working volume. Set your working fill level according to your beam size, measurement orientation and handling routine.

First-use check

Before routine use, inspect the optical faces under good light for dust, fingerprints or residue from handling. Place the cell in your holder, verify stable seating, and run a blank to confirm that the filled sample region covers the beam as intended.

Fit and optical alignment

The cell body is 12.5 × 12.5 × 45 mm. Check holder seating and surrounding clearance against these body dimensions, especially if your setup has close-fitting guides or limited side access.

Z Height is specified as 15 mm, measured from the cell bottom to the optical centre. Match that reference to your instrument beam height rather than assuming compatibility from the external size alone.

Solvents and cleaning

Quartz is widely used for optical cells, but the exact chemical limits for this sale configuration are not specified here. If your method involves aggressive chemicals, extended contact time, elevated temperature, or specialised cleaning solvents, check the full assembly suitability before use.

For general care, see fabrication guidance. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the exterior optical faces gently with non-abrasive optical tissue.

Included with this option

Sold as 1 cuvette per sale unit. Additional included components are not confirmed for this listing.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; the final quantity, feasibility, specifications, price and production time are confirmed in the project quotation. Modified designs and prototype batches are quoted separately from the listed SKU. Discuss your requirements.