(C104CS24) Quartz Micro Cuvette, 10 mm / 1 mm (dual path) Path, 350 µL

Weight	30 g

SKU: C104CS24

Original price was: $72.00.Current price is: $65.00.

In Stock

JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm primary path, a 1 mm secondary path and Four-Way Light optical access. This adhesive-bonded Standard 80 option has a 350 µL nominal capacity, includes a closure, and is supplied as 1 cuvette per price unit.

In Stock

SKU: C104CS24 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CS24 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm primary path, a 1 mm secondary path and Four-Way Light optical access. Its 350 µL nominal capacity keeps the sample chamber compact, and the included closure lets you cover the cell after filling. This option is sold as 1 cuvette per price unit.

Path Length: 10 mm / 1 mm (dual path)
Sample Volume (Nominal): 350 µL
Closure Type: Lid

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm / 1 mm (dual path)
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	1 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
External Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Material Grade	JGS1
Closure Type	Lid
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	1 mm

Choose this option

Choose C104CS24 when you need a fluorescence micro cuvette with dual-path geometry and a small nominal chamber volume in one compact format. The combination of 10 mm and 1 mm paths is useful when your method is built around this defined sample region, while the JGS1 quartz body supports work across the stated 200–2500 nm range. This option also matters if you specifically need the adhesive-bonded Standard 80 build style and can work within its chemical limits.

What makes this option different

Dual optical paths: 10 mm primary path with a 1 mm secondary path in the same cuvette.
Four-Way Light configuration: side optical access for fluorescence setups that use this geometry.
JGS1 quartz, 200–2500 nm: suitable for UV/Vis and fluorescence work within that stated wavelength range.
Adhesive-bonded Standard 80 construction: important for selection because this version has specific sample and cleaning restrictions.

Using this cell

Fill the cuvette so the illuminated sample region stays fully covered during the measurement, and keep the same orientation for blank and sample runs. Avoid bubbles, dried residue and fingerprints on the optical faces.

A closure is included, but the exact closure type is not established here. Place it gently after filling and check your own handling conditions if your workflow involves moving, storing or inverting the loaded cell.

First-use check

Inspect the quartz faces, edges and opening for shipping residue or visible damage.
Check holder fit with the empty cell before preparing sample.
Run a blank in the same orientation you will use for measurement.
Confirm that your fill level fully covers the illuminated region.

Fit and optical alignment

The stated 12.5 × 12.5 × 45 mm dimensions apply to the uncapped cell body. Use those dimensions for holder fit and compartment clearance, but allow additional space for the fitted closure because the capped height is not established here.

Z Height is not established for this SKU. If your instrument has a fixed beam position, check beam alignment before routine use rather than judging fit from total body height alone. The 350 µL value is a nominal capacity, not a minimum working volume.

Solvents and cleaning

This adhesive-bonded option uses the Standard 80 fabrication method. For this SKU, the supplier prohibits ethanol soaking or rinsing and excludes acid, alkali and organic-solvent use. In practice, this makes it a better fit for room-temperature neutral or water-based sample handling than for aggressive chemical methods.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with non-abrasive optical tissue or another suitable laboratory wipe.

Included with this option

Supplied as 1 micro cuvette. A closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

For related custom JGS1 quartz cuvette requirements involving dimensions, path length, sample volume, windows, Z Height, closures or fabrication direction, please send your drawing or labelled sketch together with holder details and sample conditions. Discuss your requirements and quote part number C104CS24.