(C014CR) Quartz Fluorescence Cuvette, 1 mm Path, 350 µL

Weight	30 g

SKU: C014CR

Original price was: $181.00.Current price is: $163.00.

In Stock

C014CR is a quartz fluorescence cuvette with a 1 mm optical path, Four-Way Light access and 350 µL nominal capacity. Its open-top body allows direct filling, and an included PTFE lid covers the opening after loading. Supplied as 1 cuvette per price unit.

In Stock

SKU: C014CR Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C014CR is a quartz fluorescence cuvette for setups that need a 1 mm optical path in a compact open-top format. Its Four-Way Light body gives optical access from four sides, while the 350 µL nominal capacity suits small-volume work without moving to a demountable assembly. The included PTFE lid covers the opening after filling, and this sale option is supplied as 1 cuvette.

Path Length: 1 mm
Sample Volume (Nominal): 350 µL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Fluorescence Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	1 mm
Light Transmission Configuration	Four-Way Light
Sample Volume (Nominal)	350 µL
External Dimensions	12.5 × 3.5 × 45 mm
Cell Body Dimensions	12.5 × 3.5 × 45 mm
External Dimensions Scope	Body Only
Body Height	45 mm
Base Dimensions	12.5 × 3.5 mm
Material	Quartz
Closure Type	Lid
Closure Material	PTFE
Closure Included	Yes
Opening Configuration	Open Top (Cell Body)

Choose this option

Choose C014CR when your method calls for a short fluorescence path and direct top loading is the simplest way to handle the sample. This format is useful when you want a small rectangular cell with side optical access on all four faces and a nominal capacity that stays in the sub-millilitre range.

What makes this option different

1 mm optical path for methods built around this short path length.
Four-Way Light geometry for excitation and collection layouts that use more than one side of the cell.
350 µL nominal capacity in an open-top quartz body for direct filling.
PTFE lid included with this 1-piece sale unit.

Using this cell

Load the sample from the open top and keep the optical faces clean in the beam area. After filling, place the PTFE lid gently over the opening. If your fluorescence method depends on a fixed excitation and collection direction, keep the same cell orientation between blank and sample measurements.

This is an open-top cuvette with a lid, not a stated sealed flow cell or pressure-rated assembly. If your procedure involves inversion, transport after filling, or other leakage-sensitive handling, check the complete setup under your own conditions before routine use.

First-use check

Inspect the cuvette before first use for chips, residue or handling marks on the optical faces. Place the empty cell in the holder to confirm seating and top clearance, then run a blank and check that the beam area remains free of bubbles and droplets after filling.

Fit and optical alignment

The stated body dimensions are 12.5 × 3.5 × 45 mm, and these dimensions apply to the body only. Check your holder for width and depth fit, and leave enough clearance above the holder for filling and lid placement.

Z Height is not specified for this SKU. If your instrument has a fixed beam-center requirement, verify alignment with your holder before ordering. Four-Way Light describes the optical access geometry of the cell body; instrument fit still depends on your beam position and holder design.

Solvents and cleaning

This cuvette is made from quartz with a PTFE lid. For a general overview of cuvette construction options, see Compare fabrication options.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning methods. Clean the optical faces gently with non-abrasive optical tissue or another non-scratching lab wipe suitable for your procedure.

Included with this option

Supplied as 1 quartz fluorescence cuvette with an included PTFE lid.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch and identify the dimensions and tolerances that are critical to your application. Prototype batches typically involve 2–4 cells; final specifications, quantity, price and production time are confirmed in the project quotation. Discuss your requirements and quote part number C014CR.