(C014TE1) Quartz Micro Cuvette, 10 mm / 1 mm (dual path) Path, 350 µL, Pack of 2

Weight	30 g

SKU: C014TE1

Original price was: $949.00.Current price is: $855.00.

In Stock

C014TE1 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm main path, a 1 mm secondary path and a Four-Way Light layout. Its 350 µL nominal capacity suits small-volume handling in a compact square-body format. Supplied as a pack of 2, with caps included.

In Stock

SKU: C014TE1 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C014TE1 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm main path, a 1 mm secondary path and a Four-Way Light layout. The 350 µL nominal capacity keeps the cell in a compact micro format, while the square base fits familiar cuvette-holder footprints. This offer is supplied as a pack of 2, with caps included.

The physical cell geometry matches the same compact format used for this style: a 12.5 × 12.5 × 45 mm rectangular body, 56 mm uncapped overall height and 60 mm overall height with cap. That makes it easier to check seating clearance and top clearance separately when you plan the installation.

Path Length: 10 mm / 1 mm (dual path)
Sample Volume (Nominal): 350 µL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm / 1 mm (dual path)
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	1 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
External Dimensions	12.5 × 12.5 × 56 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 56 mm
Overall Height without Closure	56 mm
External Dimensions Scope	Uncapped Cell
Body Height	45 mm
Overall Height with Closure	60 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Screw Cap
Closure Included	Yes
Fabrication Method	Molded 83
Detection Channel Width	1 mm

Choose this option

Choose C014TE1 when you need the same 10 mm / 1 mm dual-path fluorescence cell geometry as the single-piece option, but want a two-cuvette sale pack. The Four-Way Light layout supports side optical access around the sample region, and the separate body, uncapped and capped heights help when clearance above the holder matters.

What makes this option different

10 mm / 1 mm dual-path layout for methods that use both the main and narrow secondary optical directions.
Four-Way Light configuration for optical access from four sides around the sample region.
350 µL nominal capacity in a compact square-body micro-cuvette format.
Pack of 2 with caps included for the priced sale unit.

Using this cell

Fill each cell so the illuminated sample region remains fully covered and free of bubbles during measurement. Keep the same orientation for blank and sample runs, especially if your method depends on the 1 mm optical direction as well as the 10 mm path.

The 350 µL figure is the nominal capacity of each cell, not a minimum working volume. Fit the cap after filling if needed, but do not treat the closure as a pressure or closed-loop rating.

First-use check

Inspect both cuvettes for chips, residue or transport marks before use. Rinse with a suitable liquid for your method, seat each cell squarely in the holder, and run a blank in the same orientation you plan to use for sample measurements.

Fit and optical alignment

The square base is 12.5 × 12.5 mm for holder seating. For height planning, distinguish between the 45 mm rectangular body, the 56 mm uncapped overall height and the 60 mm overall height with the cap in place.

Z Height is not established for this item. If your instrument depends on a fixed beam position, check the actual beam height and clearance in your own holder rather than assuming fit from the external shape alone.

Solvents and cleaning

This cuvette uses Molded 83 quartz construction. Molded 83 is commonly chosen when organic-solvent methods or temperature-controlled work are part of the application, but actual sample and cleaning liquids still need to suit the complete assembly, including the cap if it will contact the liquid.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with a non-abrasive, lint-free material suitable for laboratory optical surfaces.

Included with this option

Sold as a pack of 2 micro cuvettes. Closure is included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication. Send a dimensioned drawing or labelled sketch together with your holder or instrument details, critical dimensions, sample chemistry and target quantity. Discuss your requirements and reference C014TE1.