(C022TS) Quartz Screw-Top Cuvette, 2 mm Path, 700 µL

Weight	30 g
Dimensions	1.25 × 0.45 × 5.5 mm

SKU: C022TS

Original price was: $186.00.Current price is: $168.00.

In Stock

C022TS is a quartz screw-top cuvette for UV/Vis spectroscopy with a 2 mm optical path, a straight-through Two-Way Light layout and 700 µL nominal capacity. The threaded neck gives controlled top access for filling, capping and routine handling, while the slim 4.5 × 12.5 mm base helps when holder space is limited. Sold as 1 cuvette per sale.

In Stock

SKU: C022TS Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C022TS is a quartz screw-top cuvette for UV/Vis spectroscopy with a 2 mm optical path and 700 µL nominal capacity. This option combines a straight-through Two-Way Light layout with a threaded top opening, so it suits methods that need a short path length and a more defined fill opening than an open-top chamber. Its narrow 4.5 × 12.5 mm base also helps when the holder footprint is tight.

Path Length: 2 mm
Sample Volume (Nominal): 700 µL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	2 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	700 µL
Cell Body Dimensions	4.5 × 12.5 × 35 mm
Overall Height without Closure	55 mm
Body Height	35 mm
Base Dimensions	4.5 × 12.5 mm
Material	Quartz
Closure Type	Screw Cap
Fabrication Method	Molded 83

Choose this option

Choose C022TS when your method is written for a 2 mm path and you want sample access through a screw-top neck. The top opening gives a clear route for filling and recapping during routine UV/Vis work, while the 700 µL nominal capacity keeps the sample region compact for this cell format. It is also a practical choice when you need to check holder support against a slim rectangular base rather than a wider standard body.

What makes this option different

Screw-top opening gives top access through a threaded neck, which is useful when you want to fill, cap or rinse through a defined opening rather than work with an open chamber.
2 mm optical path suits UV/Vis methods that call for this shorter transmission length.
Two-Way Light layout supports straight-through measurement across the main optical faces.
700 µL nominal capacity pairs a short path with a compact sample region for small-volume routine handling.
Optical-contact integrated construction is the supplier’s stated construction term for this cell, and the mapped Molded 83 fabrication is commonly chosen when methods involve organic-solvent workflows or temperature-related process considerations. Selection still depends on the full assembled cell and your actual sample and cleaning conditions.
4.5 × 12.5 mm base helps you review holder footprint and seating width before ordering.
Single-cuvette sale unit suits replacement, one-position use or adding one more cell to an existing setup.

Using this cell

Fill the cell through the threaded opening and make sure the liquid covers the beam area used in your instrument. Because the nominal volume is 700 µL, it is best treated as a compact-capacity cell rather than a large reservoir. Remove visible bubbles from the optical region before measurement and keep the same orientation for blank and sample when your workflow depends on repeatable positioning.

The supplier describes this model as using optical-contact integrated construction. In routine use, that means the cell is intended to be handled as a finished assembled piece: fill and rinse through the top opening, support it by the body, and avoid scraping or abrasive contact on the optical faces during cleaning.

First-use check

Inspect the optical faces, base and threaded opening for chips, dust or residue.
Rinse with a liquid suitable for your method and the complete assembled cell.
Place the cuvette in the holder and confirm stable seating and neck clearance.
Run a blank in the same orientation you will use for samples.

Fit and optical alignment

The listed body dimensions are 4.5 × 12.5 mm at the base with a 35 mm body height. The uncapped overall height is 55 mm. These points are useful for checking holder slot width, support depth and the vertical clearance available around the neck area.

Z Height is not listed for this selected SKU, and the full installed envelope with a closure fitted is not stated here. If your holder, compartment lid or beam position depends on a defined beam-center height or capped clearance, check those points before ordering.

Solvents and cleaning

This cuvette is described with optical-contact integrated construction and mapped to Molded 83 fabrication. That fabrication is typically selected for methods that may involve organic-solvent handling or temperature-related process requirements, but compatibility depends on the complete assembly and on concentration, temperature, contact time and whether the liquid is used as a sample or for cleaning.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 1 cuvette per sale. A screw-cap closure style is specified for this product type, but package contents for this option are not listed here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a related quartz cuvette with different dimensions, path length, sample volume or closure details, send your drawing or labelled sketch together with your holder or instrument information. You can start the discussion here: Discuss your requirements.