(C022TS6) Quartz Screw-Top Cuvette, 2 mm Path, 700 µL, Pack of 2

Weight	30 g
Dimensions	1.25 × 0.45 × 5.5 mm

SKU: C022TS6

Original price was: $371.00.Current price is: $334.00.

In Stock

C022TS6 is a quartz screw-top cuvette for UV/Vis spectroscopy with a 2 mm optical path, Two-Way Light transmission layout and 700 µL nominal capacity per cuvette. The screw-cap format suits methods that prefer covered sample handling, while the short path length fits applications that call for a compact transmission cell. Sold as a pack of 2 cuvettes; caps are included.

In Stock

SKU: C022TS6 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C022TS6 is a quartz screw-top cuvette set for UV/Vis spectroscopy, supplied as two cuvettes per priced pack. Each cuvette combines a 2 mm optical path with a Two-Way Light layout and 700 µL nominal capacity, making it a practical choice when you need a short-path transmission cell in a covered format. The included caps add sample access control without changing the compact body size used for holder and clearance checks.

Path Length: 2 mm
Sample Volume (Nominal): 700 µL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	2 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	700 µL
Cell Body Dimensions	4.5 × 12.5 × 35 mm
Overall Height without Closure	55 mm
Body Height	35 mm
Base Dimensions	4.5 × 12.5 mm
Material	Quartz
Closure Type	Screw Cap
Closure Included	Yes

Choose this option

Choose this item when your method needs a 2 mm quartz cuvette and you want two identical cells in one sale unit. That can be useful for blank/sample work, parallel preparation, or keeping a second matching cell available in the same format. The screw-top opening is also helpful when your handling routine benefits from covering the sample between filling and measurement.

What makes this option different

Pack of 2 cuvettes supplied under one priced option.
2 mm optical path for short-path UV/Vis transmission methods.
Two-Way Light configuration with opposing optical faces for straight-through measurements.
Screw-cap format with caps included for each cuvette.

Using this cell

Fill the cuvette so the liquid fully covers the beam region used by your instrument, then fit the cap as required by your procedure. Keep the optical faces aligned consistently between blank and sample runs, and check that no bubbles, droplets or residue remain in the light path.

The stated 700 µL value is the nominal capacity of each cuvette. It is not a minimum working volume, so low-fill methods should be checked in the actual holder and beam position you use.

First-use check

Inspect both cuvettes for clean, undamaged optical faces and intact threads.
Rinse with a cleaning liquid suitable for your method and the complete cuvette assembly.
Test fit the cuvette in your holder before routine use.
Run a blank and confirm that the filled level covers the beam path in your setup.

Fit and optical alignment

The body dimensions listed for this cuvette are useful for checking holder fit and nearby clearance: 4.5 × 12.5 mm base dimensions, 35 mm body height and 55 mm uncapped overall height. These figures help with slot width, vertical access and space above the neck during filling or capping.

Z Height is not listed for this item. If your instrument, micro-volume holder or accessory depends on a defined beam-center height, verify that requirement directly rather than inferring it from the overall geometry.

Handling and cleaning

Select sample and cleaning conditions for the complete assembly, including the cap. Chemical limits are not established here for this exact option, so methods involving aggressive solvents, strong reagents, elevated temperatures or long contact times should be checked before use.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials, and clean the optical faces gently with non-abrasive optical tissue.

Included with this option

Price is for a pack of 2 cuvettes. A screw cap is included, but the package contents are not further itemised here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a different path length, body size, sample volume, opening style or holder fit, send a dimensioned drawing or labelled sketch together with your holder details, measurement wavelength, sample conditions and quantity. Discuss your requirements and quote part number C022TS6.