(C022TS2) Quartz Screw-Top Cuvette, 2 mm Path

Weight	30 g
Dimensions	1.25 × 0.45 × 5.5 mm

SKU: C022TS2

Original price was: $309.00.Current price is: $279.00.

In Stock

C022TS2 is a quartz screw-top cuvette for UV/Vis spectroscopy with a 2 mm optical path, Two-Way Light layout and Molded 83 fabrication. This selected version uses a large-neck threaded opening for direct filling and is supplied as 1 cuvette per sale.

In Stock

SKU: C022TS2 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C022TS2 is a quartz screw-top cuvette for UV/Vis spectroscopy with a 2 mm optical path and a straight-through Two-Way Light layout. This version uses the large-neck threaded opening shown for this SKU and Molded 83 fabrication, which makes it a practical choice when you want this specific capped quartz format in a single-cuvette purchase. It is supplied as 1 cuvette per sale.

Path Length: 2 mm
Sample Volume (Nominal): 700 µL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	1 Piece
Path Length	2 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	700 µL
Material	Quartz
MQ Grade	Molded 83
Closure Type	Screw Cap
Fabrication Method	Molded 83

Choose this option

Choose C022TS2 when your method is set up for a 2 mm path and you want the large-neck screw-top style rather than a narrower opening or an open-top cell. The larger threaded access can make direct filling and rinsing more straightforward in everyday handling, while the single-cuvette sale unit suits replacement, one-position use or method setup around this exact geometry.

What makes this option different

2 mm optical path for UV/Vis methods that specify a short transmission length.
Large-neck threaded opening for direct access during filling and routine handling.
Two-Way Light layout for straight-through measurement across two optical faces.
Molded 83 fabrication for customers selecting this construction type.
Single-cuvette sale unit for one-cell replacement or setup work.

Using this cell

Fill the cuvette through the large threaded opening and make sure the liquid level covers the beam area during measurement. Before taking readings, remove visible bubbles from the optical region and keep the same orientation for blank and sample if your workflow depends on repeatable positioning.

Handle the cell by non-optical surfaces and keep the clear faces clean and dry. A screw cap is shown for this option, but the delivered package contents are not further listed here, so any required closure details should be checked before routine use.

First-use check

Inspect the optical faces and threaded opening for dust, chips or residue.
Rinse with a cleaning liquid suitable for your method before first use.
Test the cell in your holder to confirm stable seating and adequate top clearance.
Run a blank under normal measurement conditions before introducing the sample.

Fit and optical alignment

This SKU is identified as a large-neck 2 mm screw-top cuvette, but external dimensions, body height and Z Height are not listed here. If your holder, autosampler or instrument compartment has limited width, neck clearance or a fixed beam-center requirement, check those points before ordering.

Two-Way Light describes the optical direction through the cell, not a guarantee of instrument compatibility. Where beam position is critical, fit should be reviewed against your holder drawing or instrument geometry.

Solvents and cleaning

Molded 83 is commonly chosen when organic-solvent methods or temperature-related work are part of the selection discussion. Even so, the exact chemical limits for this complete assembly are not stated here, so sample liquid, concentration, temperature, contact time and closure materials should be considered together for your application.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with non-abrasive optical tissue.

Included with this option

Supplied as 1 quartz screw-top cuvette. A screw cap is shown for this selected option, but the package contents are not further listed here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

If you need a related quartz cuvette with different dimensions, path length, sample volume, closure details or fabrication requirements, send a dimensioned drawing or labelled sketch together with your holder or instrument information. To discuss a project, use Discuss your requirements and quote part number C022TS2.