(C104SS24) Quartz Micro Cuvette, 10 mm Path, 350 µL

Weight	30 g

SKU: C104SS24

Original price was: $132.00.Current price is: $119.00.

In Stock

C104SS24 is a JGS1 quartz micro cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light access and a 350 µL nominal capacity. This version uses a 1 mm sample-region width and Standard 80 adhesive-bonded construction for routine water-based room-temperature work. Sold as 1 cuvette, with a closure included.

In Stock

SKU: C104SS24 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104SS24 is a JGS1 quartz micro cuvette for fluorescence spectroscopy when you need a 10 mm optical path in a compact cell with a narrow sample region. This version combines Four-Way Light geometry, a 1 mm sample-region width and a 350 µL nominal capacity, and it uses Standard 80 adhesive-bonded quartz construction with a closure included.

Path Length: 10 mm
Sample Volume (Nominal): 350 µL
Closure Type: Stopper

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Optical Window Dimensions	1 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
External Dimensions	12.5 × 12.5 × 45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Material Grade	JGS1
Closure Type	Stopper
Closure Included	Yes
Fabrication Method	Standard 80
Detection Channel Width	1 mm

Choose this option

Choose C104SS24 when your method uses a 10 mm path length but you want a narrower defined sample region and a lower nominal capacity than the wider-channel variants in this series. It suits routine fluorescence work with water-based samples or buffers at room temperature, especially when you need a compact 12.5 × 12.5 mm body and optical access from multiple sides.

What makes this option different

10 mm optical path in a compact micro cuvette format.
1 mm sample-region width for a narrow defined measurement zone.
350 µL nominal capacity with Four-Way Light optical access.
Standard 80 adhesive-bonded quartz construction for routine water-based room-temperature use.

Using this cell

Fill the cell carefully so the beam passes through a continuous liquid column in the intended sample region. Because the measurement zone is narrow, avoid trapped bubbles, droplets on the optical faces and inconsistent seating between blank and sample runs.

The 350 µL figure is the nominal capacity of the cuvette, not a minimum working volume. If your method uses less than a full fill, check the level in your own setup so the illuminated region remains fully covered.

First-use check

Inspect the optical faces and edges for dust, residue or damage.
Rinse with a suitable water-based cleaning liquid for your method.
Place the cuvette in the holder and verify stable seating and beam placement.
Run a blank and confirm that the filled region fully covers the beam without visible bubbles.

Fit and optical alignment

The stated external dimensions are 12.5 × 12.5 × 45 mm, with a 12.5 × 12.5 mm base. This lets you check holder seating and chamber clearance before ordering, and your setup also needs enough top clearance for the closure.

The 1 mm value describes the sample-region width, not an instrument slit setting. Z Height is not specified here, so if your holder or fluorimeter depends on a defined beam-center height, please check that requirement before purchase.

Solvents and cleaning

Standard 80 is the MQ option for adhesive-bonded quartz cuvettes used with routine water-based samples and buffers at room temperature. Avoid organic sample solvents and organic cleaning agents with this construction. If your method involves organic solvents, discuss a more suitable Sintered or Molded quartz option instead.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and wipe the optical faces gently with non-abrasive optical tissue. Chemical limits beyond this selection guidance are not established here for this exact SKU.

Included with this option

Supplied as 1 micro cuvette with stopper.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

Custom projects are handled separately from this listed Standard 80 SKU. We coordinate custom JGS1 quartz cuvettes for changes involving dimensions, path length, sample volume, optical windows, Z Height, closures and tolerances. Send a dimensioned drawing or labelled sketch together with your holder details, wavelength range, sample conditions and target quantity. Discuss your requirements and mention C104SS24.