(C153SS) Quartz Triangular Cell, 1.75 mL

Weight	30 g

SKU: C153SS

Original price was: $91.00.Current price is: $82.00.

In Stock

C153SS is a JGS1 quartz triangular cell with an open top, Three-Way Light optical access and 1.75 mL nominal capacity. Its triangular outer cross-section and direct top access are the key selection points when your fixture and beam layout are built for this body shape. This MQ listing is priced per 1 piece.

In Stock

SKU: C153SS Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes, Quartz Triangular Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C153SS is a JGS1 quartz triangular cell with an open top, Three-Way Light optical access and 1.75 mL nominal capacity. Its triangular outer section makes the body geometry itself a key part of selection, while the open top gives direct access for filling, emptying and cleaning. This MQ listing is priced per 1 piece.

Sample Volume (Nominal): 1.75 mL
Opening Configuration: Open Top

Selection Specifications

Product Kind	Cuvette
Cell Type	Triangular Cell
Measurement Mode	UV/Vis Spectroscopy
Light Transmission Configuration	Three-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	1.75 mL
Body Height	45 mm
Material	Quartz
Material Grade	JGS1
Opening Configuration	Open Top

Choose this option

Choose C153SS when your setup is designed around a triangular quartz cell rather than a rectangular cuvette body. The open top is useful when you need direct pipette access to the sample region, and the three-sided optical arrangement matters when your measurement direction depends on this exact cell shape rather than a standard two-face transmission body.

What makes this option different

Triangular outer cross-section uses three stated exterior side lengths of 11.5 mm, 11.5 mm and 15 mm, which is the main fit feature for holders or fixtures made for this body shape.
Open-top access allows direct filling, emptying and rinsing from above, with no cap or stopper handling built into routine use.
Three-Way Light configuration provides optical access on three sides, which is relevant when your beam direction or observation geometry depends on this triangular format.
1.75 mL nominal capacity gives a small sample region for this cell style; it is a nominal volume, not a stated minimum working fill.
Powder-fused construction is part of the exact SKU selection, so sample choice and cleaning routine should be considered for this construction and the complete cell rather than assumed from quartz alone.
45 mm body height helps you check vertical seating and clearance, especially in fixtures that support the cell by its body rather than by a standard rectangular wall profile.

Using this cell

Fill from the open top so the liquid covers the measurement region required by your method. Remove visible bubbles before measurement, and keep the same seating direction and beam direction for blank and sample when your method depends on repeatable orientation.

The open top makes this format straightforward to rinse and refill between runs. Handle the optical faces carefully and avoid touching them during loading and cleaning.

First-use check

Inspect the optical faces and rim for residue or handling marks before first use. Run a blank with your intended liquid and confirm that the cell seats correctly in your fixture and that the beam passes through the intended filled region.

Fit and optical alignment

The stated 11.5 × 11.5 × 15 mm values are the three outer side lengths of the triangular section, not a rectangular body size and not an optical path statement. That distinction matters when you are checking support points, clamp shape or beam entry direction in a custom holder or accessory.

Body height is 45 mm, but path length and Z Height are not specified for this SKU. If your instrument has a fixed beam center or your method requires a defined path, confirm those requirements before ordering rather than inferring them from the triangular outline.

Solvents and cleaning

This quartz cell is stated for use across 200–2500 nm, but chemical limits for this exact SKU are not established here. The powder-fused construction is relevant when reviewing the sample and cleaning routine for the cell, but it does not by itself establish compatibility with aggressive solvents, elevated temperatures or prolonged exposure.

Keep hydrofluoric acid away from quartz. Avoid hot strong alkalis and abrasive cleaning, and clean optical faces gently with non-abrasive optical tissue.

Compare fabrication options if you are reviewing cell construction for a particular method or cleaning routine.

Included with this option

MQ price unit: 1 piece. If your setup requires a supplied closure or specific accessories, please check the included items before ordering.

Availability and ordering

Order this listed specification directly, or ask about current availability and dispatch. If your delivery date is important, ask before checkout; preparation or production time is separate from transit and customs clearance.

Discuss a custom version

For a different design, send a drawing or describe the change you need. Custom JGS1 quartz enquiries are assessed separately from this listed specification. Feasibility, quantity, price and timing are confirmed in the project quotation.