(C104CR27) Quartz Micro Cuvette, 10 mm Path, 350 µL

Weight	30 g

SKU: C104CR27

Original price was: $138.00.Current price is: $125.00.

In Stock

C104CR27 is a quartz micro cuvette for fluorescence spectroscopy with a 10 mm optical path, Four-Way Light access and a 350 µL nominal capacity. Its open-top body and 1 mm sample region support direct filling and visual checking before measurement. Sold per 1 cuvette, with closure included.

In Stock

SKU: C104CR27 Categories: Cuvettes, Products, Quartz Fluorescence Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C104CR27 is a quartz micro cuvette for fluorescence spectroscopy when you need a 10 mm optical path in a smaller-volume format. This version combines an open-top body, Four-Way Light access, a 1 mm sample region and 350 µL nominal capacity, so you can fill directly from above and work with a compact sample chamber rather than a larger cell body. It is sold per 1 cuvette, with closure included.

Path Length: 10 mm
Sample Volume (Nominal): 350 µL
Opening Configuration: Open Top (Cell Body)

Selection Specifications

Product Kind	Cuvette
Cell Type	Micro Cuvette
Measurement Mode	Fluorescence Spectroscopy
Pack Quantity	1 Piece
Path Length	10 mm
Light Transmission Configuration	Four-Way Light
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	350 µL
External Dimensions	12.5 × 12.5 × 45 mm
Cell Body Dimensions	12.5 × 12.5 × 45 mm
Uncapped Cell Dimensions	12.5 × 12.5 × 45 mm
External Dimensions Scope	Uncapped Cell
Material	Quartz
Closure Type	Lid
Closure Included	Yes
Opening Configuration	Open Top (Cell Body)
Detection Channel Width	1 mm

Choose this option

Choose C104CR27 when your method needs side optical access around the sample region and you want direct top loading instead of a closed or threaded filling arrangement. The 1 mm sample region and 350 µL nominal capacity make this version suited to smaller-volume fluorescence work where you want straightforward filling, viewing and cleaning access from the top.

What makes this option different

Open-top access lets you load the sample directly into the cell body and inspect the liquid surface before measurement.
Four-Way Light configuration provides optical access from multiple sides around the sample region for fluorescence setups with compatible beam geometry.
1 mm sample region identifies this exact narrow sample area and helps distinguish it from wider-chamber variants in the same family.
350 µL nominal capacity keeps this version in a smaller-volume format without changing the 10 mm optical path.
Powder-fused construction is the supplier’s stated construction term for this research version, relevant when you review cleaning and sample-contact conditions for your method.
Uncapped body size of 12.5 × 12.5 × 45 mm helps you check holder fit for the cell body while leaving extra clearance for the included closure.

Using this cell

Fill the cell from the open top and place the closure after loading if your procedure calls for covered handling during measurement. Work carefully to avoid bubbles, droplets on the optical faces or dried residue near the sample opening, as these can interfere with routine optical work.

The stated 350 µL is the nominal capacity of the cell. It is not a minimum working volume, so if you plan to work with lower fill levels, check in your own setup that the illuminated region remains fully covered during measurement.

First-use check

Inspect the chamber opening, rim and optical faces for dust or handling marks.
Place the empty cuvette in your holder and confirm stable seating before filling.
After filling, check that the sample covers the illuminated region used in your method.
Run a suitable blank first and keep the same orientation for routine comparative work.

Fit and optical alignment

The 12.5 × 12.5 × 45 mm dimensions apply to the uncapped cell body. Use those dimensions to check holder seating and surrounding clearance, but allow extra room above the body because the overall dimensions with the closure in place are not stated here.

Z Height is not stated for this SKU. If your fluorometer or holder depends on a defined beam-center height, verify that point before ordering instead of relying on the outside body size alone.

Solvents and cleaning

This research version is described by the supplier as a powder-fused construction type. For fabrication background, see MQ Cuvette Fabrication Glossary. This page does not assign an additional MQ fabrication grade to C104CR27 beyond that stated construction evidence.

Because exact chemical limits for this selected SKU are not established here, review your sample and cleaning conditions carefully, including any contact with the included closure. Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning, and clean the optical faces gently with a suitable non-abrasive laboratory wipe.

Included with this option

Supplied as 1 micro cuvette with a lid and box.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch, along with holder or instrument details, sample chemistry, contact conditions and target quantity. Prototype batches typically involve 2–4 cells; feasibility, final specifications, price and production time are confirmed in the project quotation. Discuss your requirements and quote part number C104CR27.