(C022WS3) Quartz Flow Cell, 2 mm Path, 120 µL

Weight	30 g

SKU: C022WS3

Original price was: $285.00.Current price is: $257.00.

In Stock

C022WS3 is a quartz flow cell for UV/Vis work with a 2 mm optical path, 120 µL nominal capacity and Two-Way Light transmission. Two top M6 fluid connections with PTFE fittings keep the tubing approach above the cell body.

In Stock

SKU: C022WS3 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C022WS3 is a compact quartz flow cell for UV/Vis measurements that use a 2 mm transmission path. Its 120 µL nominal capacity, Two-Way Light layout and two top M6 fluid connections make it easier to plan the cell, tubing approach and holder space as one assembly. This option is useful when you want a small upright flow-cell body without side-mounted connections crossing the optical area.

Path Length: 2 mm
Sample Volume (Nominal): 120 µL
Opening Configuration: Two Top Fluid Connections

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Path Length	2 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	17.5 × 3.5 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	120 µL
Cell Body Dimensions	12.5 × 12.5 × 35 mm
Body Height	35 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Port Count	2
Port Thread	M6
Fabrication Method	Standard 80
Opening Configuration	Two Top Fluid Connections
Fitting Material	PTFE

Choose this option

Choose C022WS3 when your method is built around a 2 mm flow path and you want both fluid connections above the cell body. The 120 µL nominal cell volume suits small in-line sample circuits, while the compact 12.5 × 12.5 × 35 mm body helps when holder space is limited and the connection approach needs to stay vertical rather than side-entry.

What makes this option different

2 mm optical path for UV/Vis transmission methods set up for this path length.
120 µL nominal capacity in a compact flow-cell body for small-volume in-line measurements.
Two top M6 ports with PTFE fittings, keeping both connections above the optical body.
Two-Way Light configuration with a direct transmission path across the flowing sample.

Using this cell

Connect your flow lines to the two top ports and fill the cell gradually so the illuminated region wets completely before measurement. During setup, check the sample zone for trapped bubbles, droplets or dried residue, as any of these can interrupt the transmission path through the liquid.

The 120 µL figure is the nominal capacity of the cell itself. It does not include tubing, connectors or the rest of your liquid path, so priming and rinse volume should be planned for the full assembly rather than from the cell alone.

No pressure limit is stated here. If your method uses a pressurized circuit, check the complete connection arrangement and operating conditions before use.

First-use check

Inspect the body and optical faces for chips, scratches, contamination or dried residue.
Check that your holder seats the cell body securely and allows clearance for top-mounted tubing.
Run a blank solution through the filled cell and confirm that the optical region is free of bubbles before measurement.

Fit and optical alignment

The stated 12.5 × 12.5 × 35 mm dimensions apply to the quartz body. Leave extra room above the cell for the fitted M6 hardware and attached tubing, because the complete installed height depends on the connection parts used and is not defined here.

The optical window area is 17.5 × 3.5 mm, and the light path is Two-Way Light rather than side-access geometry. Z Height is not listed for this cell, so beam position should be checked against your holder or instrument where vertical alignment is critical.

Solvents and cleaning

This cell uses adhesive-bonded quartz construction and is listed under Standard 80. It is generally suited to routine water-based samples and buffers at room temperature. Avoid organic samples and organic cleaning solvents with this adhesive-bonded construction.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with non-abrasive laboratory tissue or another non-scratching method suitable for quartz, and consider the rest of the wetted flow path as a complete assembly.

Included with this option

The listed price is for one C022WS3 flow cell.

Additional accessory contents should be confirmed for your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz flow-cell projects for changes involving path length, sample volume, optical windows, external size and connection details. Send a dimensioned drawing or labelled sketch together with holder information, application wavelength, liquid conditions and target quantity. Discuss your requirements and quote part number C022WS3.