(C102WS5) Quartz Flow Cell, 10 mm Path, 480 µL

Weight	30 g

SKU: C102WS5

Original price was: $124.00.Current price is: $112.00.

In Stock

Quartz flow cell for UV/Vis spectroscopy with a 10 mm optical path, 480 µL nominal capacity and Two-Way Light geometry. Two top fluid connections, a 12.5 × 12.5 mm base and 45 mm body height suit compact installations where tubing access from above is preferred. Sold as the specified C102WS5 flow cell configuration.

In Stock

SKU: C102WS5 Categories: Cuvettes, Products, Quartz Flow Cells Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102WS5 is a quartz flow cell for UV/Vis spectroscopy with a 10 mm optical path and 480 µL nominal capacity. It combines a compact square body with two top fluid connections, which is useful when you want the tubing to approach from above instead of through opposed end tubes. The body format also gives you a defined 12.5 × 12.5 mm base and 45 mm body height for mechanical planning.

Path Length: 10 mm
Sample Volume (Nominal): 480 µL
Opening Configuration: Two Top Fluid Connections

Selection Specifications

Product Kind	Flow Cell
Cell Type	Flow Cell
Measurement Mode	UV/Vis Spectroscopy
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Optical Window Dimensions	4 × 12 mm
Wavelength Range — Lower Limit	200 nm
Wavelength Range — Upper Limit	2500 nm
Sample Volume (Nominal)	480 µL
Body Height	45 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Port Count	2
Tube Outer Diameter (OD)	3 mm
Tube Inner Diameter (ID)	1.5 mm
Fabrication Method	Standard 80
Opening Configuration	Two Top Fluid Connections

Choose this option

Choose C102WS5 when you need a 10 mm flow cell in a compact body and prefer top-entry tubing. The 480 µL nominal capacity, 3 mm OD / 1.5 mm ID tube size and two top connections make it a practical option for smaller liquid paths where access above the cell is easier than access from both ends.

What makes this option different

480 µL nominal capacity in a compact 10 mm flow-cell format.
Two top fluid connections so tubing approaches from the top face.
12.5 × 12.5 mm base and 45 mm body height for holder and clearance planning.
4 × 12 mm optical window area within the compact square body.
Standard 80 adhesive-bonded construction for room-temperature water-based samples and buffers.

Using this cell

Install the cell so the beam passes through the optical faces while the top connections remain accessible for your tubing layout. Fill gradually and inspect the light path for visible bubbles before measurement. Keep the fill pattern consistent during blanking and routine use so the illuminated region is wetted in the same way each time.

The 480 µL figure is the nominal cell volume only. It does not include the extra liquid held in connected tubing and fittings, and it is not a stated minimum working volume.

First-use check

Inspect the optical faces, top connections and body edges for damage or residue.
Connect the tubing carefully and test first with a compatible blank solution.
Confirm that the optical region fills cleanly without trapped air before measurement.

Fit and optical alignment

The base and body height help with mechanical planning, while the top-mounted connections mean you also need enough space above the body for tubing bends and handling. This layout can be useful where end clearance is limited but top access is available.

Z Height is not established here. If your instrument depends on a defined beam-center height, please check that point before ordering.

Solvents and cleaning

Standard 80 is an adhesive-bonded quartz construction generally used for room-temperature water-based samples and buffers. Avoid organic sample solvents and organic cleaning agents with this construction. If your method uses organic solvents, discuss a more suitable Sintered or Molded option before ordering.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces gently with suitable non-abrasive wipes or optical tissue.

Included with this option

The listed price is for one C102WS5 flow cell.

Additional accessory contents should be confirmed for your order.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We can review custom JGS1 quartz flow cells for changes to dimensions, path length, sample volume, optical windows, Z Height, connections and fabrication. Send your holder information, tubing layout, sample conditions and a dimensioned drawing or labelled sketch if a modified version is needed.

Discuss your requirements and quote part number C102WS5.