(C012TS7) Quartz Screw-Top Cuvette, 1 mm Path, Pack of 2

Weight	30 g
Dimensions	1.25 × 0.35 × 4.5 mm

SKU: C012TS7

Original price was: $418.00.Current price is: $377.00.

In Stock

Quartz screw-top cuvette with a 1 mm optical path, Two-Way Light layout and included screw caps. The straight-through optical arrangement and covered top opening suit routine transmission measurements where you want a capped cell after filling. Supplied as a pack of 2 cuvettes.

In Stock

SKU: C012TS7 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C012TS7 is a quartz screw-top cuvette with a 1 mm optical path and a Two-Way Light configuration for straight-through transmission measurements. The screw-cap format gives you top access for filling and a covered setup for routine handling afterward. This option is supplied as a pack of 2 cuvettes, with closures included.

Path Length: 1 mm
Cell Type: Screw-Top Cuvette
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	1 mm
Light Transmission Configuration	Two-Way Light
Material	Quartz
Closure Type	Screw Cap
Closure Included	Yes

Choose this option

Choose C012TS7 when you need a 1 mm quartz cell with a simple opposing-face optical path rather than a multi-window layout. The covered screw-top format suits methods where you prefer to cap the sample after filling, and the two-cuvette sale unit is convenient for blank-and-sample work or for keeping one cell available during cleaning or preparation.

What makes this option different

1 mm optical path for short-path measurement methods.
Two-Way Light configuration for transmission through two opposing optical faces.
Screw Cap closure included for covered sample handling.
Pack of 2 cuvettes for the priced sale unit.

Using this cell

Fill the cuvette so the liquid covers the beam area used by your instrument, then cap it if your procedure calls for covered handling between preparation and measurement. Remove visible bubbles from the optical path and keep the same orientation for blank and sample runs.

A nominal capacity has not been confirmed for this option. For method setup, rely on actual beam coverage and your required fill level rather than assuming a minimum or working volume.

First-use check

Inspect the optical faces and top opening for dust, chips or dried residue.
Rinse with a cleaning liquid suitable for your method and full cell assembly.
Fill above the beam area and remove visible bubbles.
Run blank and sample in the same orientation.

Fit and optical alignment

This version is identified as a Two-Way Light screw-top cuvette, so the intended measurement path is straight through the two opposing optical faces. That is the main optical selection point for this SKU.

External dimensions and Z Height are not established here. If your holder depends on a specific body envelope, insertion depth or beam-center height, check those fit points before ordering, especially where top clearance around the cap area is limited.

Solvents and cleaning

The exact chemical limits for this selected SKU are not specified here, so choose solvents and cleaning steps for the complete assembly rather than for the quartz body alone. If your method uses aggressive reagents, heated liquids or long contact times, check suitability before use.

Do not use hydrofluoric acid with quartz. Avoid hot strong alkalis and abrasive cleaning. Clean the optical faces with non-abrasive optical tissue and a suitable laboratory rinse or solvent for your application.

Included with this option

Supplied as a pack of 2 cuvettes. Closures are included. The exact package contents beyond that are not established here.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and fabrication details. Send a dimensioned drawing or labelled sketch, together with holder information, sample conditions and target quantity. Discuss your requirements and quote part number C012TS7.