(C102TF4) Quartz Screw-Top Cuvette, 10 mm Path, 3.5 mL, Pack of 2

Weight	30 g
Dimensions	1.25 × 1.25 × 5.5 mm

SKU: C102TF4

Original price was: $371.00.Current price is: $334.00.

In Stock

C102TF4 is a quartz screw-top cuvette with a 10 mm optical path, Two-Way Light geometry and 3.5 mL nominal capacity. This version uses the supplier’s optical-contact integrated construction term and is supplied as a pack of 2 with screw-cap closure included.

In Stock

SKU: C102TF4 Categories: Cuvettes, Products, Quartz Screw-Top Cuvettes Brand: MachinedQuartz

Shipping and order support

Worldwide delivery to door service, hassle free shipping
Contact us for quotation of bulk purchase discount
Custom design. Send us graphic drawing for solution
POs for Academics. Pay after delivery.
Availability and dispatch timing vary by item and quantity. Contact us to confirm timing for your order.

Description

C102TF4 is a quartz screw-top cuvette for 10 mm path measurements in a covered cell format. It combines a 3.5 mL nominal capacity, Two-Way Light geometry and a threaded top, and this listed version is identified with the supplier’s optical-contact integrated construction term. This option is supplied as a pack of 2 with closure included.

Path Length: 10 mm
Sample Volume (Nominal): 3.5 mL
Closure Type: Screw Cap

Selection Specifications

Product Kind	Cuvette
Cell Type	Screw-Top Cuvette
Measurement Mode	UV/Vis Spectroscopy
Pack Quantity	Pack of 2
Path Length	10 mm
Light Transmission Configuration	Two-Way Light
Sample Volume (Nominal)	3.5 mL
Cell Body Dimensions	12.5 × 12.5 × 35 mm
Body Height	35 mm
Base Dimensions	12.5 × 12.5 mm
Material	Quartz
Closure Type	Screw Cap
Closure Included	Yes
Fabrication Method	Molded 0.01

Choose this option

Choose C102TF4 when your method uses a standard 10 mm transmission cell and you want this specific screw-top construction version rather than a general open cuvette format. The square body fits common holder layouts, while the cap-and-thread opening is useful when sample loading and handling are carried out in the same cell.

What makes this option different

10 mm optical path for 1 cm transmission methods.
Two-Way Light geometry through opposing optical faces.
Supplier-listed optical-contact integrated construction for this exact version.
Pack of 2 with screw-cap closure included for the listed sale unit.

Using this cell

Fill the cuvette so the liquid covers the beam area used by your instrument, then cap it as required by your handling or measurement routine. Keep bubbles away from the optical path and handle the cell by the non-optical sides where possible.

Use the same orientation for blank and sample measurements if your method depends on consistent placement. The stated 3.5 mL is a nominal capacity, not a minimum working volume.

First-use check

Inspect the optical faces and cap area for dust or residue.
Rinse with a liquid suitable for your method and the assembled cell.
Confirm that the filled sample level covers the beam area used in your instrument.
Run a blank first and verify stable placement in the holder.

Fit and optical alignment

The body dimensions are 12.5 × 12.5 × 35 mm, with a 12.5 × 12.5 mm base. These are the key dimensions to check against holders, racks and clearance around the measurement position.

Z Height is not listed for this SKU, so beam alignment should be checked separately for instruments that depend on a defined beam-center height. Outer body dimensions alone are not enough to confirm that requirement.

Solvents and cleaning

Molded 0.01 is the option to consider when your method calls for closely specified optical-path precision. For the 10 mm path on this cell, agree the required tolerance and measurement conditions for the order.

Select sample and cleaning conditions that suit the complete cell and closure assembly used in your procedure.

Do not use hydrofluoric acid on quartz. Avoid hot strong alkalis and abrasive cleaning materials. Clean the optical faces gently with non-abrasive optical tissue.

Included with this option

Pack of 2 quartz screw-top cuvettes. Screw-cap closure included.

Availability and ordering

Order this specification directly, or contact us to check current availability and dispatch timing. If temporarily unavailable, additional preparation or production time may be needed. For a required delivery date, contact us before checkout; preparation or production is separate from carrier transit and customs clearance.

Discuss a custom version

We coordinate custom JGS1 quartz production for requirements involving dimensions, optical path length, sample volume, optical windows or Z Height, closures and connections, fabrication and tolerances. Send a dimensioned drawing or labelled sketch, plus your holder details and critical dimensions. Discuss your requirements and quote part number C102TF4.